17 relations: Aircraft fabric covering, Cantilever, Caster, Dihedral (aeronautics), Elevator (aeronautics), Fin, Flap (aeronautics), Flat-four engine, Fuselage, Propeller (aeronautics), Rotax 912, Rudder, Tailplane, Tricycle landing gear, Trim tab, Ukraine, Ultralight aviation.
Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures.
A cantilever is a rigid structural element, such as a beam or a plate, anchored at only one end to a (usually vertical) support from which it is protruding.
New!!: KhAZ ViS-3 and Cantilever ·
A caster (or castor) is an undriven, single, double, or compound wheel that is designed to be mounted to the bottom of a larger object (the "vehicle") so as to enable that object to be easily moved.
New!!: KhAZ ViS-3 and Caster ·
Dihedral angle is the upward angle from horizontal of the wings or tailplane of a fixed-wing aircraft.
Elevators are flight control surfaces, usually at the rear of an aircraft, which control the aircraft's pitch, and therefore the angle of attack and the lift of the wing.
A fin is a thin component or appendage attached to a larger body or structure.
New!!: KhAZ ViS-3 and Fin ·
Flaps are devices used to alter the lift characteristics of a wing and are mounted on the trailing edges of the wings of a fixed-wing aircraft to reduce the speed at which the aircraft can be safely flown and to increase the angle of descent for landing.
New!!: KhAZ ViS-3 and Flap (aeronautics) ·
A flat-four or horizontally opposed-four is a type of four-cylinder engine, a flat engine with four cylinders arranged horizontally in two banks of two cylinders on each side of a central crankcase.
New!!: KhAZ ViS-3 and Flat-four engine ·
The fuselage (from the French fuselé "spindle-shaped") is an aircraft's main body section that holds crew and passengers or cargo.
New!!: KhAZ ViS-3 and Fuselage ·
An aircraft propeller or airscrew converts rotary motion from a piston engine, a turboprop or an electric motor, to provide propulsive force.
The Rotax 912 is a normally aspirated, air- and water-cooled, horizontally opposed four-cylinder, four-stroke, gear reduction-drive engine commonly used on certified aircraft, light sport aircraft, ultralight aircraft and unmanned aerial vehicles.
New!!: KhAZ ViS-3 and Rotax 912 ·
A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other conveyance that moves through a fluid medium (generally air or water).
New!!: KhAZ ViS-3 and Rudder ·
A tailplane, also known as horizontal stabiliser (and horizontal stabilizer in the US), is a small lifting surface located on the tail (empennage) behind the main lifting surfaces of a fixed-wing aircraft as well as other non-fixed-wing aircraft such as helicopters and gyroplanes.
New!!: KhAZ ViS-3 and Tailplane ·
Tricycle gear is a type of aircraft undercarriage, or landing gear, arranged in a tricycle fashion.
New!!: KhAZ ViS-3 and Tricycle landing gear ·
Trim tabs are small surfaces connected to the trailing edge of a larger control surface on a boat or aircraft, used to control the trim of the controls, i.e. to counteract hydro- or aerodynamic forces and stabilise the boat or aircraft in a particular desired attitude without the need for the operator to constantly apply a control force.
New!!: KhAZ ViS-3 and Trim tab ·
Ukraine (Україна, tr. Ukraina) is a country in Eastern Europe, bordered by Russia to the east and northeast, Belarus to the northwest, Poland and Slovakia to the west, Hungary, Romania, and Moldova to the southwest, and the Black Sea and Sea of Azov to the south and southeast, respectively.
New!!: KhAZ ViS-3 and Ukraine ·
Ultralight aviation (called microlight aviation in some countries) is the flying of lightweight, 1 or 2 seat fixed-wing aircraft.
New!!: KhAZ ViS-3 and Ultralight aviation ·