36 relations: Amplitude modulation, Amplitude-shift keying, Analytic signal, Band-pass filter, Bandwidth (signal processing), Baseband processor, Broadband, Carrier frequency, Carrier wave, Communication channel, Constellation diagram, Cutoff frequency, Ethernet physical layer, Fast Ethernet, Frequency modulation, Frequency-division multiplexing, Frequency-shift keying, Gigabit Ethernet, Hertz, Intermediate frequency, Line code, Local area network, Low-pass filter, Modulation, Narrowband, Passband, Phase-shift keying, Quadrature amplitude modulation, Radio frequency, Sideband, Signal, Signal processing, Single-sideband modulation, Telecommunication, Wideband, 10BASE5.
Amplitude modulation (AM) is a modulation technique used in electronic communication, most commonly for transmitting information via a radio carrier wave.
Amplitude-shift keying (ASK) is a form of amplitude modulation that represents digital data as variations in the amplitude of a carrier wave.
In mathematics and signal processing, an analytic signal is a complex-valued function that has no negative frequency components.
A band-pass filter, also bandpass filter or BPF, is a device that passes frequencies within a certain range and rejects (attenuates) frequencies outside that range.
Bandwidth is the difference between the upper and lower frequencies in a continuous band of frequencies.
A baseband processor (also known as baseband radio processor, BP, or BBP) is a device (a chip or part of a chip) in a network interface that manages all the radio functions (all functions that require an antenna); however, this term is generally not used in reference to Wi-Fi and Bluetooth radios.
In telecommunications, broadband is wide bandwidth data transmission which transports multiple signals and traffic types.
In telecommunication systems, Carrier frequency is a technical term used to indicate.
In telecommunications, a carrier wave, carrier signal, or just carrier, is a waveform (usually sinusoidal) that is modulated (modified) with an input signal for the purpose of conveying information.
A communication channel or simply channel refers either to a physical transmission medium such as a wire, or to a logical connection over a multiplexed medium such as a radio channel in telecommunications and computer networking.
A constellation diagram is a representation of a signal modulated by a digital modulation scheme such as quadrature amplitude modulation or phase-shift keying.
In physics and electrical engineering, a cutoff frequency, corner frequency, or break frequency is a boundary in a system's frequency response at which energy flowing through the system begins to be reduced (attenuated or reflected) rather than passing through.
The Ethernet physical layer is the physical layer functionality of the Ethernet family of computer network standards.
In computer networking, Fast Ethernet is a collective term for a number of Ethernet standards that carry traffic at the nominal rate of 100 Mbit/s (the earlier Ethernet speed was 10 Mbit/s).
In telecommunications and signal processing, frequency modulation (FM) is the encoding of information in a carrier wave by varying the instantaneous frequency of the wave.
In telecommunications, frequency-division multiplexing (FDM) is a technique by which the total bandwidth available in a communication medium is divided into a series of non-overlapping frequency bands, each of which is used to carry a separate signal.
Frequency-shift keying (FSK) is a frequency modulation scheme in which digital information is transmitted through discrete frequency changes of a carrier signal.
In computer networking, Gigabit Ethernet (GbE or 1 GigE) is a term describing various technologies for transmitting Ethernet frames at a rate of a gigabit per second (1,000,000,000 bits per second), as defined by the IEEE 802.3-2008 standard.
The hertz (symbol: Hz) is the derived unit of frequency in the International System of Units (SI) and is defined as one cycle per second.
In communications and electronic engineering, an intermediate frequency (IF) is a frequency to which a carrier wave is shifted as an intermediate step in transmission or reception.
Some signals are more prone to error than others when conveyed over a communication channel as the physics of the communication or storage medium constrains the repertoire of signals that can be used reliably.
A local area network (LAN) is a computer network that interconnects computers within a limited area such as a residence, school, laboratory, university campus or office building.
A low-pass filter (LPF) is a filter that passes signals with a frequency lower than a certain cutoff frequency and attenuates signals with frequencies higher than the cutoff frequency.
In electronics and telecommunications, modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal, with a modulating signal that typically contains information to be transmitted.
In radio, narrowband describes a channel in which the bandwidth of the message does not significantly exceed the channel's coherence bandwidth.
A passband is the range of frequencies or wavelengths that can pass through a filter.
Phase-shift keying (PSK) is a digital modulation process which conveys data by changing (modulating) the phase of a constant frequency reference signal (the carrier wave).
Quadrature amplitude modulation (QAM) is the name of a family of digital modulation methods and a related family of analog modulation methods widely used in modern telecommunications to transmit information.
Radio frequency (RF) refers to oscillatory change in voltage or current in a circuit, waveguide or transmission line in the range extending from around twenty thousand times per second to around three hundred billion times per second, roughly between the upper limit of audio and the lower limit of infrared.
In radio communications, a sideband is a band of frequencies higher than or lower than the carrier frequency, containing power as a result of the modulation process.
A signal as referred to in communication systems, signal processing, and electrical engineering is a function that "conveys information about the behavior or attributes of some phenomenon".
Signal processing concerns the analysis, synthesis, and modification of signals, which are broadly defined as functions conveying "information about the behavior or attributes of some phenomenon", such as sound, images, and biological measurements.
In radio communications, single-sideband modulation (SSB) or single-sideband suppressed-carrier modulation (SSB-SC) is a type of modulation, used to transmit information, such as an audio signal, by radio waves.
Telecommunication is the transmission of signs, signals, messages, words, writings, images and sounds or information of any nature by wire, radio, optical or other electromagnetic systems.
In communications, a system is wideband when the message bandwidth significantly exceeds the coherence bandwidth of the channel.
10BASE5 (also known as thick Ethernet or thicknet) was the first commercially available variant of Ethernet.
Base band, Baseband Signal, Baseband channel, Baseband equivalent signal, Baseband signal, Baseband signaling, Baseband technology, Equivalent baseband model, Equivalent baseband signal, Equivalent lowpass signal, Low-pass equivalent.