Faster access than browser!
169 relations: AC power plugs and sockets, Acoustical engineering, Advanced Library Format, AES47, Aramid, ATML, Battery nomenclature, Boiling water reactor, Circuit breaker, Colorimetry, Common external power supply, Compact disc, Compact Disc Digital Audio, Comparative Tracking Index, Computer Automated Measurement and Control, Computer monitor, Crimp (electrical), Design review, DICOM, Digital Addressable Lighting Interface, Digital Living Network Alliance, Digital Radio Mondiale, Direct current, E-series of preferred numbers, EDIF, Edison screw, Electric battery, Electric vehicle, Electrical ballast, Electrical equipment in hazardous areas, Electricity meter, Electromagnetic compatibility, Electromagnetic interference, Electromagnetism, Electronic Chart Display and Information System, Electronic color code, Electrostatics, Emitter-coupled logic, EN 62262, Event tree analysis, Failure mode and effects analysis, FASTBUS, Fault tree analysis, Ferrite core, Fieldbus, Floating-point arithmetic, Fluorescent lamp, Global Maritime Distress and Safety System, Hazard and operability study, High-voltage direct current, ..., Home automation, IEC 60027, IEC 60034, IEC 60038, IEC 60068, IEC 60228, IEC 60269, IEC 60309, IEC 60320, IEC 60364, IEC 60446, IEC 60601, IEC 60870, IEC 60906-1, IEC 60929, IEC 60958, IEC 61030, IEC 61108, IEC 61131, IEC 61162, IEC 61334, IEC 61346, IEC 61355, IEC 61400, IEC 61499, IEC 61508, IEC 61511, IEC 61850, IEC 61851, IEC 61883, IEC 61968, IEC 61970, IEC 62056, IEC 62061, IEC 62196, IEC 62264, IEC 62304, IEC 62325, IEC 62351, IEC 62366, IEC 62379, IEC 62455, IEC 62682, IEC 62700, IEC 63110, IEEE 754, IEEE-488, Instrument transformer, Insulator (electricity), International Electrotechnical Commission, International Electrotechnical Vocabulary, International Organization for Standardization, IP Code, IP-XACT, ISO/IEC 80000, ISO/TS 80004, Laser safety, Letter and digit code, Light fixture, Liquid-crystal display, List of IEC technical committees, List of International Organization for Standardization standards, Microphone, Multi-master bus, Nanotechnology, Nickel–cadmium battery, NTSC, Optical amplifier, Optical fiber, Optical fiber cable, Optical time-domain reflectometer, Overhead line, Overhead power line, PAL, Photovoltaic system performance, Piezoelectricity, Plasma display, Polychlorinated biphenyl, Potentiometer, Power-line communication, Power-system protection, Preferred number, Programmable logic controller, Property Specification Language, RAMS, Relay, Residual-current device, Resistor, S/PDIF, Satellite navigation, SCADA, Sequential function chart, Serial communication, Solar panel, Sound intensity, Standard cell, Static VAR compensator, Sulfur hexafluoride, Super Video CD, Superconductivity, Surface acoustic wave, Surface-mount technology, Switch, Thermocouple, Train communication network, Transformer, Type B videotape, Type C videotape, Uninterruptible power supply, USB, VHS, Video tape recorder, VMEbus, Voyage data recorder, Water metering, Weibull distribution, Wind turbine, Wireless power transfer, 19-inch rack. Expand index (119 more) »
AC power plugs and sockets
AC power plugs and sockets are devices that allow electrically operated equipment to be connected to the primary alternating current (AC) power supply in a building.
New!!: List of International Electrotechnical Commission standards and AC power plugs and sockets · See more »
Acoustical engineering
Acoustical engineering (also known as acoustic engineering) is the branch of engineering dealing with sound and vibration.
New!!: List of International Electrotechnical Commission standards and Acoustical engineering · See more »
Advanced Library Format
Advanced Library Format (ALF), also known as IEEE 1603 or IEC 62265, is an IEEE and IEC standard that describes a data specification language for library elements used in ASIC design applications for integrated circuits.
New!!: List of International Electrotechnical Commission standards and Advanced Library Format · See more »
AES47
AES47 is a standard which describes a method for transporting AES3 professional digital audio streams over Asynchronous Transfer Mode (ATM) networks.
New!!: List of International Electrotechnical Commission standards and AES47 · See more »
Aramid
Aramid fibers are a class of heat-resistant and strong synthetic fibers.
New!!: List of International Electrotechnical Commission standards and Aramid · See more »
ATML
Automatic Test Markup Language (ATML) is a collection of XML schemas that allows automatic test systems (ATS) to exchange test information in a common format adhering to the XML standard.
New!!: List of International Electrotechnical Commission standards and ATML · See more »
Battery nomenclature
Standard battery nomenclature describes portable dry cell batteries that have physical dimensions and electrical characteristics interchangeable between manufacturers.
New!!: List of International Electrotechnical Commission standards and Battery nomenclature · See more »
Boiling water reactor
The boiling water reactor (BWR) is a type of light water nuclear reactor used for the generation of electrical power.
New!!: List of International Electrotechnical Commission standards and Boiling water reactor · See more »
Circuit breaker
A circuit breaker is an automatically operated electrical switch designed to protect an electrical circuit from damage caused by excess current from an overload or short circuit.
New!!: List of International Electrotechnical Commission standards and Circuit breaker · See more »
Colorimetry
Colorimetry is "the science and technology used to quantify and describe physically the human color perception." It is similar to spectrophotometry, but is distinguished by its interest in reducing spectra to the physical correlates of color perception, most often the CIE 1931 XYZ color space tristimulus values and related quantities.
New!!: List of International Electrotechnical Commission standards and Colorimetry · See more »
Common external power supply
In 2009 a European Commission initiative resulted in the specification of a common external power supply (common EPS) for use with data-enabled mobile phones sold in the European Union.
New!!: List of International Electrotechnical Commission standards and Common external power supply · See more »
Compact disc
Compact disc (CD) is a digital optical disc data storage format that was co-developed by Philips and Sony and released in 1982.
New!!: List of International Electrotechnical Commission standards and Compact disc · See more »
Compact Disc Digital Audio
Compact Disc Digital Audio (CDDA or CD-DA) is the standard format for audio compact discs.
New!!: List of International Electrotechnical Commission standards and Compact Disc Digital Audio · See more »
Comparative Tracking Index
The Comparative Tracking Index or CTI is used to measure the electrical breakdown (tracking) properties of an insulating material.
New!!: List of International Electrotechnical Commission standards and Comparative Tracking Index · See more »
Computer Automated Measurement and Control
Computer-Aided Measurement And Control (CAMAC) is a standard bus and modular-crate electronics standard for data acquisition and control used in particle detectors for nuclear and particle physics and in industry.
New!!: List of International Electrotechnical Commission standards and Computer Automated Measurement and Control · See more »
Computer monitor
A computer monitor is an output device which displays information in pictorial form.
New!!: List of International Electrotechnical Commission standards and Computer monitor · See more »
Crimp (electrical)
An electrical crimp is a type of solderless electrical connection.
New!!: List of International Electrotechnical Commission standards and Crimp (electrical) · See more »
Design review
A design review is a milestone within a product development process whereby a design is evaluated against its requirements in order to verify the outcomes of previous activities and identify issues before committing to - and if need to be re-prioritise - further work.
New!!: List of International Electrotechnical Commission standards and Design review · See more »
DICOM
Digital Imaging and Communications in Medicine (DICOM) is the standard for the communication and management of medical imaging information and related data.
New!!: List of International Electrotechnical Commission standards and DICOM · See more »
Digital Addressable Lighting Interface
Digital Addressable Lighting Interface (DALI) is a trademark for network-based systems that control lighting in building automation.
New!!: List of International Electrotechnical Commission standards and Digital Addressable Lighting Interface · See more »
Digital Living Network Alliance
Digital Living Network Alliance (DLNA) (originally named Digital Home Working Group, DHWG) was founded by a group of consumer electronics companies in June 2003 (with Sony in the lead role) to develop and promote a set of interoperability guidelines for sharing digital media among multimedia devices under the auspice of a certification standard.
New!!: List of International Electrotechnical Commission standards and Digital Living Network Alliance · See more »
Digital Radio Mondiale
Digital Radio Mondiale (DRM; mondiale being Italian and French for "worldwide") is a set of digital audio broadcasting technologies designed to work over the bands currently used for analogue radio broadcasting including AM broadcasting, particularly shortwave, and FM broadcasting.
New!!: List of International Electrotechnical Commission standards and Digital Radio Mondiale · See more »
Direct current
Direct current (DC) is the unidirectional flow of electric charge.
New!!: List of International Electrotechnical Commission standards and Direct current · See more »
E-series of preferred numbers
The E-series is a system of preferred numbers (also called preferred values) derived for use in electronic components.
New!!: List of International Electrotechnical Commission standards and E-series of preferred numbers · See more »
EDIF
EDIF (Electronic Design Interchange Format) is a vendor-neutral format based on S-Expressions in which to store Electronic netlists and schematics.
New!!: List of International Electrotechnical Commission standards and EDIF · See more »
Edison screw
Edison screw (ES) is a standard socket for light bulbs in North America.
New!!: List of International Electrotechnical Commission standards and Edison screw · See more »
Electric battery
An electric battery is a device consisting of one or more electrochemical cells with external connections provided to power electrical devices such as flashlights, smartphones, and electric cars.
New!!: List of International Electrotechnical Commission standards and Electric battery · See more »
Electric vehicle
An electric vehicle, also called an EV, uses one or more electric motors or traction motors for propulsion.
New!!: List of International Electrotechnical Commission standards and Electric vehicle · See more »
Electrical ballast
An electrical ballast is a device placed in line with the load to limit the amount of current in an electrical circuit.
New!!: List of International Electrotechnical Commission standards and Electrical ballast · See more »
Electrical equipment in hazardous areas
In electrical engineering, hazardous locations (sometimes abbreviated to HazLoc, pronounced Haz·Lōk) are defined as places where fire or explosion hazards may exist due to flammable gases, flammable liquid–produced vapors, combustible liquid–produced vapors, combustible dusts, or ignitable fibers/flyings present in the air in quantities sufficient to produce explosive or ignitable mixtures.
New!!: List of International Electrotechnical Commission standards and Electrical equipment in hazardous areas · See more »
Electricity meter
analog electricity meter. Electricity meter with transparent plastic case (Israel) North American domestic electronic electricity meter An electricity meter, electric meter, electrical meter, or energy meter is a device that measures the amount of electric energy consumed by a residence, a business, or an electrically powered device.
New!!: List of International Electrotechnical Commission standards and Electricity meter · See more »
Electromagnetic compatibility
Electromagnetic compatibility (EMC) is the branch of electrical engineering concerned with the unintentional generation, propagation and reception of electromagnetic energy which may cause unwanted effects such as electromagnetic interference (EMI) or even physical damage in operational equipment.
New!!: List of International Electrotechnical Commission standards and Electromagnetic compatibility · See more »
Electromagnetic interference
Electromagnetic interference (EMI), also called radio-frequency interference (RFI) when in the radio frequency spectrum, is a disturbance generated by an external source that affects an electrical circuit by electromagnetic induction, electrostatic coupling, or conduction.
New!!: List of International Electrotechnical Commission standards and Electromagnetic interference · See more »
Electromagnetism
Electromagnetism is a branch of physics involving the study of the electromagnetic force, a type of physical interaction that occurs between electrically charged particles.
New!!: List of International Electrotechnical Commission standards and Electromagnetism · See more »
Electronic Chart Display and Information System
An Electronic Chart Display and Information System (ECDIS) is a geographic information system used for nautical navigation that complies with International Maritime Organization (IMO) regulations as an alternative to paper nautical charts.
New!!: List of International Electrotechnical Commission standards and Electronic Chart Display and Information System · See more »
Electronic color code
An electronic color code is used to indicate the values or ratings of electronic components, usually for resistors, but also for capacitors, inductors, diodes and others.
New!!: List of International Electrotechnical Commission standards and Electronic color code · See more »
Electrostatics
Electrostatics is a branch of physics that studies electric charges at rest.
New!!: List of International Electrotechnical Commission standards and Electrostatics · See more »
Emitter-coupled logic
In electronics, emitter-coupled logic (ECL) is a high-speed integrated circuit bipolar transistor logic family.
New!!: List of International Electrotechnical Commission standards and Emitter-coupled logic · See more »
EN 62262
The European standard EN 62262 — the equivalent of international standard IEC 62262 (2002) — relates to IK ratings.
New!!: List of International Electrotechnical Commission standards and EN 62262 · See more »
Event tree analysis
Event tree analysis (ETA) is a forward, bottom up, logical modeling technique for both success and failure that explores responses through a single initiating event and lays a path for assessing probabilities of the outcomes and overall system analysis.
New!!: List of International Electrotechnical Commission standards and Event tree analysis · See more »
Failure mode and effects analysis
Failure mode and effects analysis (FMEA)—also "failure modes", plural, in many publications—was one of the first highly structured, systematic techniques for failure analysis.
New!!: List of International Electrotechnical Commission standards and Failure mode and effects analysis · See more »
FASTBUS
FASTBUS (IEEE 960) is a computer bus standard, originally intended to replace Computer Automated Measurement and Control (CAMAC) in high-speed, large-scale data acquisition.
New!!: List of International Electrotechnical Commission standards and FASTBUS · See more »
Fault tree analysis
Fault tree analysis (FTA) is a top-down, deductive failure analysis in which an undesired state of a system is analyzed using Boolean logic to combine a series of lower-level events.
New!!: List of International Electrotechnical Commission standards and Fault tree analysis · See more »
Ferrite core
In electronics, a ferrite core is a type of magnetic core made of ferrite on which the windings of electric transformers and other wound components such as inductors are formed.
New!!: List of International Electrotechnical Commission standards and Ferrite core · See more »
Fieldbus
Fieldbus is the name of a family of industrial computer network protocols used for real-time distributed control, standardized as IEC 61158.
New!!: List of International Electrotechnical Commission standards and Fieldbus · See more »
Floating-point arithmetic
In computing, floating-point arithmetic is arithmetic using formulaic representation of real numbers as an approximation so as to support a trade-off between range and precision.
New!!: List of International Electrotechnical Commission standards and Floating-point arithmetic · See more »
Fluorescent lamp
A fluorescent lamp, or fluorescent tube, is a low-pressure mercury-vapor gas-discharge lamp that uses fluorescence to produce visible light.
New!!: List of International Electrotechnical Commission standards and Fluorescent lamp · See more »
Global Maritime Distress and Safety System
The Global Maritime Distress and Safety System (GMDSS) is an internationally agreed-upon set of safety procedures, types of equipment, and communication protocols used to increase safety and make it easier to rescue distressed ships, boats and aircraft.
New!!: List of International Electrotechnical Commission standards and Global Maritime Distress and Safety System · See more »
Hazard and operability study
A hazard and operability study (HAZOP) is a structured and systematic examination of a complex planned or existing process or operation in order to identify and evaluate problems that may represent risks to personnel or equipment.
New!!: List of International Electrotechnical Commission standards and Hazard and operability study · See more »
High-voltage direct current
A high-voltage, direct current (HVDC) electric power transmission system (also called a power superhighway or an electrical superhighway) uses direct current for the bulk transmission of electrical power, in contrast with the more common alternating current (AC) systems.
New!!: List of International Electrotechnical Commission standards and High-voltage direct current · See more »
Home automation
Home automation or domotics is building automation for a home, called a smart home or smart house.
New!!: List of International Electrotechnical Commission standards and Home automation · See more »
IEC 60027
IEC 60027 (formerly IEC 27) is a technical international standard for letter symbols published by the International Electrotechnical Commission, comprising the following parts.
New!!: List of International Electrotechnical Commission standards and IEC 60027 · See more »
IEC 60034
IEC 60034 is an international standard of the International Electrotechnical Commission for rotating electrical machinery.
New!!: List of International Electrotechnical Commission standards and IEC 60034 · See more »
IEC 60038
International Standard IEC 60038:1983 defines a set of standard voltages for use in low voltage and high voltage AC electricity supply systems.
New!!: List of International Electrotechnical Commission standards and IEC 60038 · See more »
IEC 60068
IEC 60068 is an international standard for the environmental testing of electrotechnical products that is published by the International Electrotechnical Commission.
New!!: List of International Electrotechnical Commission standards and IEC 60068 · See more »
IEC 60228
IEC 60228 is the International Electrotechnical Commission's international standard on conductors of insulated cables.
New!!: List of International Electrotechnical Commission standards and IEC 60228 · See more »
IEC 60269
In electrical engineering, IEC 60269 is a set of technical standards for low-voltage power fuses.
New!!: List of International Electrotechnical Commission standards and IEC 60269 · See more »
IEC 60309
IEC 60309 (formerly IEC 309 and CEE 17, also published by CENELEC as EN 60309) is an international standard from the International Electrotechnical Commission (IEC) for "plugs, socket-outlets and couplers for industrial purposes".
New!!: List of International Electrotechnical Commission standards and IEC 60309 · See more »
IEC 60320
IEC 60320 Appliance couplers for household and similar general purposes is a set of standards from the International Electrotechnical Commission (IEC) specifying non-locking appliance and interconnection couplers for connecting power supply cords to electrical appliances of voltage not exceeding 250 V (a.c.) and rated current not exceeding 16 A.
New!!: List of International Electrotechnical Commission standards and IEC 60320 · See more »
IEC 60364
IEC 60364 Electrical Installations for Buildings is the International Electrotechnical Commission's international standard on electrical installations of buildings.
New!!: List of International Electrotechnical Commission standards and IEC 60364 · See more »
IEC 60446
International standard IEC 60446 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors defines basic safety principles for identifying electrical conductors by colours or numerals, for example in electricity distribution wiring.
New!!: List of International Electrotechnical Commission standards and IEC 60446 · See more »
IEC 60601
IEC 60601 is a series of technical standards for the safety and essential performance of medical electrical equipment, published by the International Electrotechnical Commission.
New!!: List of International Electrotechnical Commission standards and IEC 60601 · See more »
IEC 60870
In electrical engineering and power system automation, the International Electrotechnical Commission 60870 standards define systems used for telecontrol (supervisory control and data acquisition).
New!!: List of International Electrotechnical Commission standards and IEC 60870 · See more »
IEC 60906-1
IEC 60906-1 is an international standard designed "to provide a standard for a safe, compact and practical 16 A 250 V AC system of plugs and socket-outlets that could be accepted by many countries as their national standard, even if not in the near future." The standard was originally published by the International Electrotechnical Commission in 1986; the current edition is ed2.0 published in 2009.
New!!: List of International Electrotechnical Commission standards and IEC 60906-1 · See more »
IEC 60929
IEC 60929 is an international standard created by the International Electrotechnical Commission and covers electronic ballasts used in AC supplies with voltages up to 1000 V and with operating frequencies at 50 Hz or 60 Hz.
New!!: List of International Electrotechnical Commission standards and IEC 60929 · See more »
IEC 60958
IEC 60958 (formerly IEC 958) is the International Electrotechnical Commission's standard on digital audio interfaces.
New!!: List of International Electrotechnical Commission standards and IEC 60958 · See more »
IEC 61030
D²B (Domestic Digital Bus, IEC 61030) is an IEC standard for a low-speed multi-master serial communication bus for home automation applications.
New!!: List of International Electrotechnical Commission standards and IEC 61030 · See more »
IEC 61108
IEC 61108 is a collection of IEC standards for "Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS)".
New!!: List of International Electrotechnical Commission standards and IEC 61108 · See more »
IEC 61131
IEC 61131 is an IEC standard for programmable controllers.
New!!: List of International Electrotechnical Commission standards and IEC 61131 · See more »
IEC 61162
IEC 61162 is a collection of IEC standards for "Digital interfaces for navigational equipment within a ship".
New!!: List of International Electrotechnical Commission standards and IEC 61162 · See more »
IEC 61334
IEC 61334, known as Distribution automation using distribution line carrier systems, is a standard for low-speed reliable power line communications by electricity meters, water meters and SCADA.
New!!: List of International Electrotechnical Commission standards and IEC 61334 · See more »
IEC 61346
IEC 61346 is an electrotechnical standard titled "Industrial systems, Installations and Equipment and Industrial Products — Structuring Principles and Reference Designations".
New!!: List of International Electrotechnical Commission standards and IEC 61346 · See more »
IEC 61355
The standard IEC 61355-1 Classification and designation of documents for plants, systems and equipment describes rules and guidelines for the uniform classification and identification of documents based on their characteristic content of information.
New!!: List of International Electrotechnical Commission standards and IEC 61355 · See more »
IEC 61400
IEC 61400 is an International Standard published by the International Electrotechnical Commission regarding wind turbines.
New!!: List of International Electrotechnical Commission standards and IEC 61400 · See more »
IEC 61499
The international standard IEC 61499, addressing the topic of function blocks for industrial process measurement and control systems, was initially published in 2005.
New!!: List of International Electrotechnical Commission standards and IEC 61499 · See more »
IEC 61508
IEC 61508 is an international standard published by the International Electrotechnical Commission of rules applied in industry.
New!!: List of International Electrotechnical Commission standards and IEC 61508 · See more »
IEC 61511
IEC standard 61511 is a technical standard which sets out practices in the engineering of systems that ensure the safety of an industrial process through the use of instrumentation.
New!!: List of International Electrotechnical Commission standards and IEC 61511 · See more »
IEC 61850
IEC 61850 is an international standard defining communication protocols for intelligent electronic devices at electrical substations.
New!!: List of International Electrotechnical Commission standards and IEC 61850 · See more »
IEC 61851
IEC 61851 is an international standard for electric vehicle conductive charging systems, parts of which are currently still under development.
New!!: List of International Electrotechnical Commission standards and IEC 61851 · See more »
IEC 61883
IEC 61883 Consumer audio/video equipment - Digital interface is a technical standard for a digital interface that is used by IEEE 1394 (FireWire) devices for audio and video equipment.
New!!: List of International Electrotechnical Commission standards and IEC 61883 · See more »
IEC 61968
IEC 61968 is a series of standards under development that will define standards for information exchanges between electrical distribution systems.
New!!: List of International Electrotechnical Commission standards and IEC 61968 · See more »
IEC 61970
The IEC 61970 series of standards deals with the application program interfaces for energy management systems (EMS).
New!!: List of International Electrotechnical Commission standards and IEC 61970 · See more »
IEC 62056
IEC 62056 is a set of standards for Electricity metering data exchange by International Electrotechnical Commission.
New!!: List of International Electrotechnical Commission standards and IEC 62056 · See more »
IEC 62061
IEC/EN 62061, ”Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems,” is the machinery specific implementation of IEC/EN 61508.
New!!: List of International Electrotechnical Commission standards and IEC 62061 · See more »
IEC 62196
IEC 62196 Plugs, socket-outlets, vehicle couplers and vehicle inlets – Conductive charging of electric vehicles is an international standard for a set of electrical connectors for electric vehicles and is maintained by the International Electrotechnical Commission (IEC).
New!!: List of International Electrotechnical Commission standards and IEC 62196 · See more »
IEC 62264
IEC 62264 is an international standard for enterprise-control system integration.
New!!: List of International Electrotechnical Commission standards and IEC 62264 · See more »
IEC 62304
The international standard IEC 62304 – medical device software – software life cycle processes is a standard which specifies life cycle requirements for the development of medical software and software within medical devices.
New!!: List of International Electrotechnical Commission standards and IEC 62304 · See more »
IEC 62325
IEC 62325 is a set of standards related to deregulated energy market communications, based on the Common Information Model.
New!!: List of International Electrotechnical Commission standards and IEC 62325 · See more »
IEC 62351
IEC 62351 is a standard developed by WG15 of IEC TC57.
New!!: List of International Electrotechnical Commission standards and IEC 62351 · See more »
IEC 62366
The international standard IEC 62366 medical devices - Application of usability engineering to medical devices is a standard which specifies usability requirements for the development of medical devices.
New!!: List of International Electrotechnical Commission standards and IEC 62366 · See more »
IEC 62379
IEC 62379 is a control engineering standard for the common control interface for networked digital audio and video products.
New!!: List of International Electrotechnical Commission standards and IEC 62379 · See more »
IEC 62455
IEC 62455 (also known as the 18Crypt system) is an International Electrotechnical Commission terminal specification standard, prepared by the IEC 100 (Audio, video and multimedia systems and equipment) Technical Committee (TC), for a service purchase and protection system for digital broadcasts.
New!!: List of International Electrotechnical Commission standards and IEC 62455 · See more »
IEC 62682
IEC 62682 is a technical standard titled Management of alarms systems for the process industries.
New!!: List of International Electrotechnical Commission standards and IEC 62682 · See more »
IEC 62700
IEC Technical Specification 62700: DC Power supply for notebook computer is an IEC specification of a common standard for external laptop computer AC adapters.
New!!: List of International Electrotechnical Commission standards and IEC 62700 · See more »
IEC 63110
IEC 63110 is an international standard defining a protocol for the management of electric vehicles charging and discharging infrastructures, which is currently under development.
New!!: List of International Electrotechnical Commission standards and IEC 63110 · See more »
IEEE 754
The IEEE Standard for Floating-Point Arithmetic (IEEE 754) is a technical standard for floating-point computation established in 1985 by the Institute of Electrical and Electronics Engineers (IEEE).
New!!: List of International Electrotechnical Commission standards and IEEE 754 · See more »
IEEE-488
IEEE 488 is a short-range digital communications 8-bit parallel multi-master interface bus specification.
New!!: List of International Electrotechnical Commission standards and IEEE-488 · See more »
Instrument transformer
Instrument transformers are high accuracy class electrical devices used to isolate or transform voltage or current levels.
New!!: List of International Electrotechnical Commission standards and Instrument transformer · See more »
Insulator (electricity)
An electrical insulator is a material whose internal electric charges do not flow freely; very little electric current will flow through it under the influence of an electric field.
New!!: List of International Electrotechnical Commission standards and Insulator (electricity) · See more »
International Electrotechnical Commission
The International Electrotechnical Commission (IEC; in French: Commission électrotechnique internationale) is an international standards organization that prepares and publishes International Standards for all electrical, electronic and related technologies – collectively known as "electrotechnology".
New!!: List of International Electrotechnical Commission standards and International Electrotechnical Commission · See more »
International Electrotechnical Vocabulary
The International Electrotechnical Vocabulary (IEV) serves to promote the global unification of terminology in the field of electrotechnology, electronics and telecommunications.
New!!: List of International Electrotechnical Commission standards and International Electrotechnical Vocabulary · See more »
International Organization for Standardization
The International Organization for Standardization (ISO) is an international standard-setting body composed of representatives from various national standards organizations.
New!!: List of International Electrotechnical Commission standards and International Organization for Standardization · See more »
IP Code
The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures.
New!!: List of International Electrotechnical Commission standards and IP Code · See more »
IP-XACT
IP-XACT is an XML format that defines and describes individual, re-usable electronic circuit designs (individual pieces of intellectual property, or IPs) to facilitate their use in creating integrated circuits (i.e. microchips).
New!!: List of International Electrotechnical Commission standards and IP-XACT · See more »
ISO/IEC 80000
ISO 80000 or IEC 80000 is an international standard promulgated jointly by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).
New!!: List of International Electrotechnical Commission standards and ISO/IEC 80000 · See more »
ISO/TS 80004
The ISO/TS 80004 series of standards, from the International Organization for Standardization, describe vocabulary for nanotechnology and its applications.
New!!: List of International Electrotechnical Commission standards and ISO/TS 80004 · See more »
Laser safety
Laser safety is the safe design, use and implementation of lasers to minimize the risk of laser accidents, especially those involving eye injuries.
New!!: List of International Electrotechnical Commission standards and Laser safety · See more »
Letter and digit code
The letter and digit code for resistance and capacitance values and tolerances, which is also known as RKM code or "R notation", is a notation to specify resistor and capacitor values defined in the international standard IEC 60062 (formerly IEC 62) since 1952.
New!!: List of International Electrotechnical Commission standards and Letter and digit code · See more »
Light fixture
A light fixture (US English), light fitting (UK English), or luminaire is an electrical device that contains an electric lamp that provides illumination.
New!!: List of International Electrotechnical Commission standards and Light fixture · See more »
Liquid-crystal display
A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals.
New!!: List of International Electrotechnical Commission standards and Liquid-crystal display · See more »
List of IEC technical committees
IEC or is a standards-making body in the field of electrical and electronics technologies.
New!!: List of International Electrotechnical Commission standards and List of IEC technical committees · See more »
List of International Organization for Standardization standards
This is a list of publishedThis list generally excludes draft versions.
New!!: List of International Electrotechnical Commission standards and List of International Organization for Standardization standards · See more »
Microphone
A microphone, colloquially nicknamed mic or mike, is a transducer that converts sound into an electrical signal.
New!!: List of International Electrotechnical Commission standards and Microphone · See more »
Multi-master bus
A multi-master bus is a computer bus in which there are multiple bus master nodes present on the bus.
New!!: List of International Electrotechnical Commission standards and Multi-master bus · See more »
Nanotechnology
Nanotechnology ("nanotech") is manipulation of matter on an atomic, molecular, and supramolecular scale.
New!!: List of International Electrotechnical Commission standards and Nanotechnology · See more »
Nickel–cadmium battery
The nickel–cadmium battery (NiCd battery or NiCad battery) is a type of rechargeable battery using nickel oxide hydroxide and metallic cadmium as electrodes.
New!!: List of International Electrotechnical Commission standards and Nickel–cadmium battery · See more »
NTSC
NTSC, named after the National Television System Committee,National Television System Committee (1951–1953),, 17 v. illus., diagrs., tables.
New!!: List of International Electrotechnical Commission standards and NTSC · See more »
Optical amplifier
An optical amplifier is a device that amplifies an optical signal directly, without the need to first convert it to an electrical signal.
New!!: List of International Electrotechnical Commission standards and Optical amplifier · See more »
Optical fiber
An optical fiber or optical fibre is a flexible, transparent fiber made by drawing glass (silica) or plastic to a diameter slightly thicker than that of a human hair.
New!!: List of International Electrotechnical Commission standards and Optical fiber · See more »
Optical fiber cable
An optical fiber cable, also known as a fiber optic cable, is an assembly similar to an electrical cable, but containing one or more optical fibers that are used to carry light.
New!!: List of International Electrotechnical Commission standards and Optical fiber cable · See more »
Optical time-domain reflectometer
An optical time-domain reflectometer (OTDR) is an optoelectronic instrument used to characterize an optical fiber.
New!!: List of International Electrotechnical Commission standards and Optical time-domain reflectometer · See more »
Overhead line
An overhead line or overhead wire is used to transmit electrical energy to trams, trolleybuses or trains.
New!!: List of International Electrotechnical Commission standards and Overhead line · See more »
Overhead power line
An overhead power line is a structure used in electric power transmission and distribution to transmit electrical energy along large distances.
New!!: List of International Electrotechnical Commission standards and Overhead power line · See more »
PAL
Phase Alternating Line (PAL) is a color encoding system for analogue television used in broadcast television systems in most countries broadcasting at 625-line / 50 field (25 frame) per second (576i).
New!!: List of International Electrotechnical Commission standards and PAL · See more »
Photovoltaic system performance
Photovoltaic performance monitoring systems serve several purposes.
New!!: List of International Electrotechnical Commission standards and Photovoltaic system performance · See more »
Piezoelectricity
Piezoelectricity is the electric charge that accumulates in certain solid materials (such as crystals, certain ceramics, and biological matter such as bone, DNA and various proteins) in response to applied mechanical stress.
New!!: List of International Electrotechnical Commission standards and Piezoelectricity · See more »
Plasma display
A plasma display panel (PDP) is a type of flat panel display common to large TV displays or larger.
New!!: List of International Electrotechnical Commission standards and Plasma display · See more »
Polychlorinated biphenyl
A polychlorinated biphenyl (PCB) is an organic chlorine compound with the formula C12H10−xClx.
New!!: List of International Electrotechnical Commission standards and Polychlorinated biphenyl · See more »
Potentiometer
A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.
New!!: List of International Electrotechnical Commission standards and Potentiometer · See more »
Power-line communication
Power-line communication (PLC) carries data on a conductor that is also used simultaneously for AC electric power transmission or electric power distribution to consumers.
New!!: List of International Electrotechnical Commission standards and Power-line communication · See more »
Power-system protection
Power-system protection is a branch of electrical power engineering that deals with the protection of electrical power systems from faults through the isolation of faulted parts from the rest of the electrical network.
New!!: List of International Electrotechnical Commission standards and Power-system protection · See more »
Preferred number
In industrial design, preferred numbers (also called preferred values or preferred series) are standard guidelines for choosing exact product dimensions within a given set of constraints.
New!!: List of International Electrotechnical Commission standards and Preferred number · See more »
Programmable logic controller
A programmable logic controller (PLC), or programmable controller is an industrial digital computer which has been ruggedized and adapted for the control of manufacturing processes, such as assembly lines, or robotic devices, or any activity that requires high reliability control and ease of programming and process fault diagnosis.
New!!: List of International Electrotechnical Commission standards and Programmable logic controller · See more »
Property Specification Language
Property Specification Language (PSL) is a temporal logic extending Linear temporal logic with a range of operators for both ease of expression and enhancement of expressive power.
New!!: List of International Electrotechnical Commission standards and Property Specification Language · See more »
RAMS
RAMS is an acronym for Reliability, Availability, Maintainability, and Safety.
New!!: List of International Electrotechnical Commission standards and RAMS · See more »
Relay
A relay is an electrically operated switch.
New!!: List of International Electrotechnical Commission standards and Relay · See more »
Residual-current device
A residual-current device (RCD), or residual-current circuit breaker (RCCB), is a device that instantly breaks an electric circuit to prevent serious harm from an ongoing electric shock.
New!!: List of International Electrotechnical Commission standards and Residual-current device · See more »
Resistor
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element.
New!!: List of International Electrotechnical Commission standards and Resistor · See more »
S/PDIF
S/PDIF (Sony/Philips Digital Interface) is a type of digital audio interconnect used in consumer audio equipment to output audio over reasonably short distances.
New!!: List of International Electrotechnical Commission standards and S/PDIF · See more »
Satellite navigation
A satellite navigation or satnav system is a system that uses satellites to provide autonomous geo-spatial positioning.
New!!: List of International Electrotechnical Commission standards and Satellite navigation · See more »
SCADA
Supervisory control and data acquisition (SCADA) is a control system architecture that uses computers, networked data communications and graphical user interfaces for high-level process supervisory management, but uses other peripheral devices such as programmable logic controllers and discrete PID controllers to interface with the process plant or machinery.
New!!: List of International Electrotechnical Commission standards and SCADA · See more »
Sequential function chart
Sequential function chart (SFC) is a graphical programming language used for programmable logic controllers (PLCs).
New!!: List of International Electrotechnical Commission standards and Sequential function chart · See more »
Serial communication
In telecommunication and data transmission, serial communication is the process of sending data one bit at a time, sequentially, over a communication channel or computer bus.
New!!: List of International Electrotechnical Commission standards and Serial communication · See more »
Solar panel
Photovoltaic solar panels absorb sunlight as a source of energy to generate electricity.
New!!: List of International Electrotechnical Commission standards and Solar panel · See more »
Sound intensity
Sound intensity level also known as acoustic intensity is defined as the power carried by sound waves per unit area in a direction perpendicular to that area.
New!!: List of International Electrotechnical Commission standards and Sound intensity · See more »
Standard cell
In semiconductor design, standard cell methodology is a method of designing application-specific integrated circuits (ASICs) with mostly digital-logic features.
New!!: List of International Electrotechnical Commission standards and Standard cell · See more »
Static VAR compensator
A static VAR compensator is a set of electrical devices for providing fast-acting reactive power on high-voltage electricity transmission networks.
New!!: List of International Electrotechnical Commission standards and Static VAR compensator · See more »
Sulfur hexafluoride
Sulfur hexafluoride (SF6) is an inorganic, colorless, odorless, non-flammable, extremely potent greenhouse gas, and an excellent electrical insulator.
New!!: List of International Electrotechnical Commission standards and Sulfur hexafluoride · See more »
Super Video CD
Super Video CD (Super Video Compact Disc or SVCD) is a digital format for storing video on standard compact discs.
New!!: List of International Electrotechnical Commission standards and Super Video CD · See more »
Superconductivity
Superconductivity is a phenomenon of exactly zero electrical resistance and expulsion of magnetic flux fields occurring in certain materials, called superconductors, when cooled below a characteristic critical temperature.
New!!: List of International Electrotechnical Commission standards and Superconductivity · See more »
Surface acoustic wave
A surface acoustic wave (SAW) is an acoustic wave traveling along the surface of a material exhibiting elasticity, with an amplitude that typically decays exponentially with depth into the substrate.
New!!: List of International Electrotechnical Commission standards and Surface acoustic wave · See more »
Surface-mount technology
Surface-mount technology (SMT) is a method for producing electronic circuits in which the components are mounted or placed directly onto the surface of printed circuit boards (PCBs).
New!!: List of International Electrotechnical Commission standards and Surface-mount technology · See more »
Switch
In electrical engineering, a switch is an electrical component that can "make" or "break" an electrical circuit, interrupting the current or diverting it from one conductor to another.
New!!: List of International Electrotechnical Commission standards and Switch · See more »
Thermocouple
A thermocouple is an electrical device consisting of two dissimilar electrical conductors forming electrical junctions at differing temperatures.
New!!: List of International Electrotechnical Commission standards and Thermocouple · See more »
Train communication network
The train communication network (TCN) is a hierarchical combination of two fieldbus for data transmission within trains.
New!!: List of International Electrotechnical Commission standards and Train communication network · See more »
Transformer
A transformer is a static electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
New!!: List of International Electrotechnical Commission standards and Transformer · See more »
Type B videotape
1 inch type B VTR (designated Type B by SMPTE) is a reel-to-reel analog recording video tape format developed by the Bosch Fernseh division of Bosch in Germany in 1976.
New!!: List of International Electrotechnical Commission standards and Type B videotape · See more »
Type C videotape
1 inch Type C (designated Type C by SMPTE) is a professional reel-to-reel analog recording helical scan videotape format co-developed and introduced by Ampex and Sony in 1976.
New!!: List of International Electrotechnical Commission standards and Type C videotape · See more »
Uninterruptible power supply
An uninterruptible power supply or uninterruptible power source (UPS) is an electrical apparatus that provides emergency power to a load when the input power source or mains power fails.
New!!: List of International Electrotechnical Commission standards and Uninterruptible power supply · See more »
USB
USB (abbreviation of Universal Serial Bus), is an industry standard that was developed to define cables, connectors and protocols for connection, communication, and power supply between personal computers and their peripheral devices.
New!!: List of International Electrotechnical Commission standards and USB · See more »
VHS
The Video Home System (VHS) is a standard for consumer-level analog video recording on tape cassettes.
New!!: List of International Electrotechnical Commission standards and VHS · See more »
Video tape recorder
A video tape recorder (VTR) is a tape recorder designed to record and playback video and audio material on magnetic tape.
New!!: List of International Electrotechnical Commission standards and Video tape recorder · See more »
VMEbus
VMEbus (Versa Module Europa bus) is a computer bus standard, originally developed for the Motorola 68000 line of CPUs, but later widely used for many applications and standardized by the IEC as ANSI/IEEE 1014-1987.
New!!: List of International Electrotechnical Commission standards and VMEbus · See more »
Voyage data recorder
Voyage data recorder, or VDR, is a data recording system designed for all vessels required to comply with the IMO's International Convention SOLAS Requirements (IMO Res.A.861(20)) in order to collect data from various sensors on board the vessel.
New!!: List of International Electrotechnical Commission standards and Voyage data recorder · See more »
Water metering
Water metering is the process of measuring water use.
New!!: List of International Electrotechnical Commission standards and Water metering · See more »
Weibull distribution
No description.
New!!: List of International Electrotechnical Commission standards and Weibull distribution · See more »
Wind turbine
A wind turbine is a device that converts the wind's kinetic energy into electrical energy.
New!!: List of International Electrotechnical Commission standards and Wind turbine · See more »
Wireless power transfer
Wireless power transfer (WPT), wireless power transmission, wireless energy transmission, or electromagnetic power transfer is the transmission of electrical energy without wires as a physical link.
New!!: List of International Electrotechnical Commission standards and Wireless power transfer · See more »
19-inch rack
A 19-inch rack is a standardized frame or enclosure for mounting multiple electronic equipment modules.
New!!: List of International Electrotechnical Commission standards and 19-inch rack · See more »
Redirects here:
IEC 169, IEC 60044, IEC 60050, IEC 60065, IEC 60071, IEC 60073, IEC 60076, IEC 60079, IEC 60085, IEC 60092-350, IEC 60094, IEC 60096, IEC 60098, IEC 60099, IEC 60134, IEC 60137, IEC 60146, IEC 60169, IEC 60183, IEC 60204, IEC 60214, IEC 60233, IEC 60238, IEC 60245, IEC 60255, IEC 60268, IEC 60270, IEC 60287, IEC 60296, IEC 60298, IEC 60317, IEC 60331, IEC 60335, IEC 60439, IEC 60445, IEC 60479, IEC 60502, IEC 60571, IEC 60574, IEC 60598, IEC 60603, IEC 60617, IEC 60651, IEC 60694, IEC 60715, IEC 60721, IEC 60726, IEC 60730, IEC 60747, IEC 60748, IEC 60774, IEC 60793, IEC 60801, IEC 60812, IEC 60815, IEC 60849, IEC 60874, IEC 60884, IEC 60898, IEC 60906, IEC 60921, IEC 60942, IEC 60945, IEC 60947, IEC 60950, IEC 61000, IEC 61009, IEC 61010, IEC 61025, IEC 61043, IEC 61058, IEC 61097, IEC 61149, IEC 61156, IEC 61164, IEC 61194, IEC 61215, IEC 61238, IEC 61277, IEC 61280, IEC 61286, IEC 61326, IEC 61345, IEC 61378, IEC 61439, IEC 61439 standard, IEC 61513, IEC 61537, IEC 61557, IEC 61558, IEC 61603, IEC 61642, IEC 61643, IEC 61646, IEC 61672, IEC 61701, IEC 61724, IEC 61727, IEC 61730, IEC 61753, IEC 61800, IEC 61803, IEC 61829, IEC 61846, IEC 61892, IEC 61966, IEC 61993, IEC 62040, IEC 62041, IEC 62087, IEC 62108, IEC 62270, IEC 62271, IEC 62278, IEC 62282, IEC 62301, IEC 62305, IEC 62443, IEC 62464, IEC 62471, IEC 62481, IEC 62502, IEC 80001, IEC EN 61000-4-2, IEC standards, List of IEC standards.
References
[1] https://en.wikipedia.org/wiki/List_of_International_Electrotechnical_Commission_standards
