Logo
Unionpedia
Communication
Get it on Google Play
New! Download Unionpedia on your Androidâ„¢ device!
Free
Faster access than browser!
 

Tip and ring

Index Tip and ring

Tip and ring are the names of the two conductors or sides of a telephone line. [1]

15 relations: Business telephone system, Cathodic protection, Diode bridge, Direct inward dial, Dual-tone multi-frequency signaling, Ground start, Main distribution frame, On-premises wiring, Party line (telephony), Phone connector (audio), Rotary dial, T-carrier, Telephone line, Telephone plug, 25-pair color code.

Business telephone system

A business telephone system is a multiline telephone system typically used in business environments, encompassing systems ranging from small key telephone systems to large-scale private branch exchanges.

New!!: Tip and ring and Business telephone system · See more »

Cathodic protection

Cathodic protection (CP) is a technique used to control the corrosion of a metal surface by making it the cathode of an electrochemical cell.

New!!: Tip and ring and Cathodic protection · See more »

Diode bridge

A diode bridge is an arrangement of four (or more) diodes in a bridge circuit configuration that provides the same polarity of output for either polarity of input.

New!!: Tip and ring and Diode bridge · See more »

Direct inward dial

Direct inward dialing (DID), also called direct dial-in (DDI) in Europe and Oceania, is a telecommunication service offered by telephone companies to subscribers who operate a private branch exchange (PBX) system.

New!!: Tip and ring and Direct inward dial · See more »

Dual-tone multi-frequency signaling

Dual-tone multi-frequency signaling (DTMF) is an in-band telecommunication signaling system using the voice-frequency band over telephone lines between telephone equipment and other communications devices and switching centers.

New!!: Tip and ring and Dual-tone multi-frequency signaling · See more »

Ground start

In telephony, ground start is a method of signaling from a terminal of a subscriber local loop to a telephone exchange, where one side of a cable pair is temporarily grounded to request dial tone.

New!!: Tip and ring and Ground start · See more »

Main distribution frame

In telephony, a main distribution frame (MDF or main frame) is a signal distribution frame for connecting equipment (inside plant) to cables and subscriber carrier equipment (outside plant).

New!!: Tip and ring and Main distribution frame · See more »

On-premises wiring

On-premises wiring (customer premises wiring) is customer-owned telecommunication transmission or distribution lines.

New!!: Tip and ring and On-premises wiring · See more »

Party line (telephony)

A party line (multiparty line, shared service line, party wire) is a local loop telephone circuit that is shared by multiple telephone service subscribers.

New!!: Tip and ring and Party line (telephony) · See more »

Phone connector (audio)

A phone connector, also known as phone jack, audio jack, headphone jack or jack plug, is a family of electrical connectors typically used for analog audio signals.

New!!: Tip and ring and Phone connector (audio) · See more »

Rotary dial

A rotary dial is a component of a telephone or a telephone switchboard that implements a signaling technology in telecommunications known as pulse dialing.

New!!: Tip and ring and Rotary dial · See more »

T-carrier

The T-carrier is a member of the series of carrier systems developed by AT&T Bell Laboratories for digital transmission of multiplexed telephone calls.

New!!: Tip and ring and T-carrier · See more »

Telephone line

A telephone line or telephone circuit (or just line or circuit within the industry) is a single-user circuit on a telephone communication system.

New!!: Tip and ring and Telephone line · See more »

Telephone plug

A telephone plug is a type of connector used to connect a telephone set to the telephone wiring inside a building, establishing a connection to a telephone network.

New!!: Tip and ring and Telephone plug · See more »

25-pair color code

The 25-pair color code, originally known as even-count color code, is a color code used to identify individual conductors in twisted-pair wiring for telecommunications.

New!!: Tip and ring and 25-pair color code · See more »

References

[1] https://en.wikipedia.org/wiki/Tip_and_ring

OutgoingIncoming
Hey! We are on Facebook now! »