20 relations: Bit rate, CANopen, Ethernet Train Backbone, Factory Instrumentation Protocol, Fieldbus, FlexRay, High-Level Data Link Control, IC 2000, ICE 3, ICE T, ICE TD, InnoTrans, LonWorks, Manchester code, Process control, Profibus, RS-485, Twisted pair, UIC 568, Vehicle bus.
In telecommunications and computing, bit rate (bitrate or as a variable R) is the number of bits that are conveyed or processed per unit of time.
CANopen is a communication protocol and device profile specification for embedded systems used in automation.
Ethernet Train Backbone (ETB) is a Train Communication Network based on Ethernet Technology standardised with IEC-61375-2-5.
The Factory Instrumentation Protocol or FIP is a standardized field bus protocol.
Fieldbus is the name of a family of industrial computer network protocols used for real-time distributed control, standardized as IEC 61158.
FlexRay is an automotive network communications protocol developed by the FlexRay Consortium to govern on-board automotive computing.
High-Level Data Link Control (HDLC) is a bit-oriented code-transparent synchronous data link layer protocol developed by the International Organization for Standardization (ISO).
The IC 2000 is a double-deck train in Switzerland and is run by Swiss Federal Railways (SBB) as part of its InterCity service.
ICE 3, or Intercity-Express 3, is a family of high-speed EMU trains operated by Deutsche Bahn.
DBAG Class 411 and Class 415 are German tilting high-speed electric multiple-unit trains in service with Deutsche Bahn (DB), commonly known as ICE T.
The DBAG Class 605, commonly known as the ICE TD was a high-speed diesel multiple unit (DMU) train, in service with Deutsche Bahn and DSB.
InnoTrans is the world's largest trade fair focused on the rail transport industry.
LonWorks (local operating network) is a networking platform specifically created to address the needs of control applications.
In telecommunication and data storage, Manchester code (also known as phase encoding, or PE) is a line code in which the encoding of each data bit is either low then high, or high then low, for equal time.
Automatic process control in continuous production processes is a combination of control engineering and chemical engineering disciplines that uses industrial control systems to achieve a production level of consistency, economy and safety which could not be achieved purely by human manual control.
PROFIBUS (Process Field Bus) is a standard for fieldbus communication in automation technology and was first promoted in 1989 by BMBF (German department of education and research) and then used by Siemens.
RS-485, also known as TIA-485(-A), EIA-485, is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems. Electrical signaling is balanced, and multipoint systems are supported. The standard is jointly published by the Telecommunications Industry Association and Electronic Industries Alliance (TIA/EIA). Digital communications networks implementing the standard can be used effectively over long distances and in electrically noisy environments. Multiple receivers may be connected to such a network in a linear, multidrop bus. These characteristics make RS-485 useful in industrial control systems and similar applications.
Twisted pair cabling is a type of wiring in which two conductors of a single circuit are twisted together for the purposes of improving electromagnetic compatibility.
The UIC 568 standard from the International Union of Railways (UIC), describes a 13-conductor cable and connectors used for transmitting a variety of data and commands between a locomotive and passenger carriages.
A vehicle bus is a specialized internal communications network that interconnects components inside a vehicle (e.g., automobile, bus, train, industrial or agricultural vehicle, ship, or aircraft).