Similarities between Asynchronous serial communication and High-Level Data Link Control
Asynchronous serial communication and High-Level Data Link Control have 7 things in common (in Unionpedia): Duplex (telecommunications), Endianness, Frame (networking), Modem, Point-to-Point Protocol, RS-232, Synchronous serial communication.
Duplex (telecommunications)
A duplex communication system is a point-to-point system composed of two or more connected parties or devices that can communicate with one another in both directions.
Asynchronous serial communication and Duplex (telecommunications) · Duplex (telecommunications) and High-Level Data Link Control ·
Endianness
Endianness refers to the sequential order in which bytes are arranged into larger numerical values when stored in memory or when transmitted over digital links.
Asynchronous serial communication and Endianness · Endianness and High-Level Data Link Control ·
Frame (networking)
A frame is a digital data transmission unit in computer networking and telecommunication.
Asynchronous serial communication and Frame (networking) · Frame (networking) and High-Level Data Link Control ·
Modem
A modem (modulator–demodulator) is a network hardware device that modulates one or more carrier wave signals to encode digital information for transmission and demodulates signals to decode the transmitted information.
Asynchronous serial communication and Modem · High-Level Data Link Control and Modem ·
Point-to-Point Protocol
In computer networking, Point-to-Point Protocol (PPP) is a data link layer (layer 2) communications protocol used to establish a direct connection between two nodes.
Asynchronous serial communication and Point-to-Point Protocol · High-Level Data Link Control and Point-to-Point Protocol ·
RS-232
In telecommunications, RS-232, Recommended Standard 232 is a standard introduced in 1960 for serial communication transmission of data.
Asynchronous serial communication and RS-232 · High-Level Data Link Control and RS-232 ·
Synchronous serial communication
Synchronous serial communication describes a serial communication protocol in which "data is sent in a continuous stream at constant rate." Synchronous communication requires that the clocks in the transmitting and receiving devices are synchronized – running at the same rate – so the receiver can sample the signal at the same time intervals used by the transmitter.
Asynchronous serial communication and Synchronous serial communication · High-Level Data Link Control and Synchronous serial communication ·
The list above answers the following questions
- What Asynchronous serial communication and High-Level Data Link Control have in common
- What are the similarities between Asynchronous serial communication and High-Level Data Link Control
Asynchronous serial communication and High-Level Data Link Control Comparison
Asynchronous serial communication has 26 relations, while High-Level Data Link Control has 58. As they have in common 7, the Jaccard index is 8.33% = 7 / (26 + 58).
References
This article shows the relationship between Asynchronous serial communication and High-Level Data Link Control. To access each article from which the information was extracted, please visit: