Faster access than browser!Similarities between Atmel AVR and Embedded system
Atmel AVR and Embedded system have 29 things in common (in Unionpedia): Analog-to-digital converter, Application-specific integrated circuit, Arduino, ARM architecture, Assembly language, CAN bus, Compiler, Digital signal processor, Digital-to-analog converter, Direct memory access, Ethernet, Field-programmable gate array, Flash memory, General-purpose input/output, High-level programming language, IAR Systems, I²C, In-system programming, JTAG, Light-emitting diode, Linux, Liquid-crystal display, Microcontroller, Reduced instruction set computer, RS-232, RS-485, Serial Peripheral Interface, USB, Watchdog timer.
Analog-to-digital converter
In electronics, an analog-to-digital converter (ADC, A/D, or A-to-D) is a system that converts an analog signal, such as a sound picked up by a microphone or light entering a digital camera, into a digital signal.
Analog-to-digital converter and Atmel AVR · Analog-to-digital converter and Embedded system ·
Application-specific integrated circuit
An Application-Specific Integrated Circuit (ASIC), is an integrated circuit (IC) customized for a particular use, rather than intended for general-purpose use.
Application-specific integrated circuit and Atmel AVR · Application-specific integrated circuit and Embedded system ·
Arduino
Arduino is an open source computer hardware and software company, project, and user community that designs and manufactures single-board microcontrollers and microcontroller kits for building digital devices and interactive objects that can sense and control objects in the physical and digital world.
Arduino and Atmel AVR · Arduino and Embedded system ·
ARM architecture
ARM, previously Advanced RISC Machine, originally Acorn RISC Machine, is a family of reduced instruction set computing (RISC) architectures for computer processors, configured for various environments.
ARM architecture and Atmel AVR · ARM architecture and Embedded system ·
Assembly language
An assembly (or assembler) language, often abbreviated asm, is a low-level programming language, in which there is a very strong (but often not one-to-one) correspondence between the assembly program statements and the architecture's machine code instructions.
Assembly language and Atmel AVR · Assembly language and Embedded system ·
CAN bus
A Controller Area Network (CAN bus) is a robust vehicle bus standard designed to allow microcontrollers and devices to communicate with each other in applications without a host computer.
Atmel AVR and CAN bus · CAN bus and Embedded system ·
Compiler
A compiler is computer software that transforms computer code written in one programming language (the source language) into another programming language (the target language).
Atmel AVR and Compiler · Compiler and Embedded system ·
Digital signal processor
A digital signal processor (DSP) is a specialized microprocessor (or a SIP block), with its architecture optimized for the operational needs of digital signal processing.
Atmel AVR and Digital signal processor · Digital signal processor and Embedded system ·
Digital-to-analog converter
In electronics, a digital-to-analog converter (DAC, D/A, D2A, or D-to-A) is a system that converts a digital signal into an analog signal.
Atmel AVR and Digital-to-analog converter · Digital-to-analog converter and Embedded system ·
Direct memory access
Direct memory access (DMA) is a feature of computer systems that allows certain hardware subsystems to access main system memory (Random-access memory), independent of the central processing unit (CPU).
Atmel AVR and Direct memory access · Direct memory access and Embedded system ·
Ethernet
Ethernet is a family of computer networking technologies commonly used in local area networks (LAN), metropolitan area networks (MAN) and wide area networks (WAN).
Atmel AVR and Ethernet · Embedded system and Ethernet ·
Field-programmable gate array
A field-programmable gate array (FPGA) is an integrated circuit designed to be configured by a customer or a designer after manufacturing hence "field-programmable".
Atmel AVR and Field-programmable gate array · Embedded system and Field-programmable gate array ·
Flash memory
Flash memory is an electronic (solid-state) non-volatile computer storage medium that can be electrically erased and reprogrammed.
Atmel AVR and Flash memory · Embedded system and Flash memory ·
General-purpose input/output
A general-purpose input/output (GPIO) is an uncommitted digital signal pin on an integrated circuit or electronic circuit board whose behavior—including whether it acts an input or output—is controllable by the user at run time.
Atmel AVR and General-purpose input/output · Embedded system and General-purpose input/output ·
High-level programming language
In computer science, a high-level programming language is a programming language with strong abstraction from the details of the computer.
Atmel AVR and High-level programming language · Embedded system and High-level programming language ·
IAR Systems
IAR Systems is a Swedish computer software company that offers development tools for embedded systems.
Atmel AVR and IAR Systems · Embedded system and IAR Systems ·
I²C
I²C (Inter-Integrated Circuit), pronounced I-squared-C, is a synchronous, multi-master, multi-slave, packet switched, single-ended, serial computer bus invented in 1982 by Philips Semiconductor (now NXP Semiconductors).
Atmel AVR and I²C · Embedded system and I²C ·
In-system programming
In-system programming (ISP), also called in-circuit serial programming (ICSP), is the ability of some programmable logic devices, microcontrollers, and other embedded devices to be programmed while installed in a complete system, rather than requiring the chip to be programmed prior to installing it into the system.
Atmel AVR and In-system programming · Embedded system and In-system programming ·
JTAG
JTAG (named after the Joint Test Action Group which codified it) is an industry standard for verifying designs and testing printed circuit boards after manufacture.
Atmel AVR and JTAG · Embedded system and JTAG ·
Light-emitting diode
A light-emitting diode (LED) is a two-lead semiconductor light source.
Atmel AVR and Light-emitting diode · Embedded system and Light-emitting diode ·
Linux
Linux is a family of free and open-source software operating systems built around the Linux kernel.
Atmel AVR and Linux · Embedded system and Linux ·
Liquid-crystal display
A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals.
Atmel AVR and Liquid-crystal display · Embedded system and Liquid-crystal display ·
Microcontroller
A microcontroller (MCU for microcontroller unit, or UC for μ-controller) is a small computer on a single integrated circuit.
Atmel AVR and Microcontroller · Embedded system and Microcontroller ·
Reduced instruction set computer
A reduced instruction set computer, or RISC (pronounced 'risk'), is one whose instruction set architecture (ISA) allows it to have fewer cycles per instruction (CPI) than a complex instruction set computer (CISC).
Atmel AVR and Reduced instruction set computer · Embedded system and Reduced instruction set computer ·
RS-232
In telecommunications, RS-232, Recommended Standard 232 is a standard introduced in 1960 for serial communication transmission of data.
Atmel AVR and RS-232 · Embedded system and RS-232 ·
RS-485
RS-485, also known as TIA-485(-A), EIA-485, is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems. Electrical signaling is balanced, and multipoint systems are supported. The standard is jointly published by the Telecommunications Industry Association and Electronic Industries Alliance (TIA/EIA). Digital communications networks implementing the standard can be used effectively over long distances and in electrically noisy environments. Multiple receivers may be connected to such a network in a linear, multidrop bus. These characteristics make RS-485 useful in industrial control systems and similar applications.
Atmel AVR and RS-485 · Embedded system and RS-485 ·
Serial Peripheral Interface
The Serial Peripheral Interface (SPI) is a synchronous serial communication interface specification used for short distance communication, primarily in embedded systems.
Atmel AVR and Serial Peripheral Interface · Embedded system and Serial Peripheral Interface ·
USB
USB (abbreviation of Universal Serial Bus), is an industry standard that was developed to define cables, connectors and protocols for connection, communication, and power supply between personal computers and their peripheral devices.
Atmel AVR and USB · Embedded system and USB ·
Watchdog timer
A watchdog timer (sometimes called a computer operating properly or COP timer, or simply a watchdog) is an electronic timer that is used to detect and recover from computer malfunctions.
Atmel AVR and Watchdog timer · Embedded system and Watchdog timer ·
The list above answers the following questions
- What Atmel AVR and Embedded system have in common
- What are the similarities between Atmel AVR and Embedded system
Atmel AVR and Embedded system Comparison
Atmel AVR has 101 relations, while Embedded system has 192. As they have in common 29, the Jaccard index is 9.90% = 29 / (101 + 192).
References
This article shows the relationship between Atmel AVR and Embedded system. To access each article from which the information was extracted, please visit:
