Faster access than browser!Similarities between Bus (computing) and Industry Standard Architecture
Bus (computing) and Industry Standard Architecture have 25 things in common (in Unionpedia): Accelerated Graphics Port, Amiga Zorro II, Backplane, Bus mastering, Central processing unit, Conventional PCI, Direct memory access, Extended Industry Standard Architecture, IBM, IBM Personal Computer, Industry Standard Architecture, List of interface bit rates, Low Pin Count, Memory-mapped I/O, Micro Channel architecture, NuBus, Parallel ATA, PC Card, PC/104, PCI Express, Plug and play, SCSI, Serial ATA, USB, VESA Local Bus.
Accelerated Graphics Port
The Accelerated Graphics Port (AGP) was designed as a high-speed point-to-point channel for attaching a video card to a computer system, primarily to assist in the acceleration of 3D computer graphics.
Accelerated Graphics Port and Bus (computing) · Accelerated Graphics Port and Industry Standard Architecture ·
Amiga Zorro II
Zorro II is the general purpose expansion bus used by the Amiga 2000 computer.
Amiga Zorro II and Bus (computing) · Amiga Zorro II and Industry Standard Architecture ·
Backplane
A backplane (or "backplane system") is a group of electrical connectors in parallel with each other, so that each pin of each connector is linked to the same relative pin of all the other connectors, forming a computer bus.
Backplane and Bus (computing) · Backplane and Industry Standard Architecture ·
Bus mastering
In computing, bus mastering is a feature supported by many bus architectures that enables a device connected to the bus to initiate direct memory access (DMA) transactions.
Bus (computing) and Bus mastering · Bus mastering and Industry Standard Architecture ·
Central processing unit
A central processing unit (CPU) is the electronic circuitry within a computer that carries out the instructions of a computer program by performing the basic arithmetic, logical, control and input/output (I/O) operations specified by the instructions.
Bus (computing) and Central processing unit · Central processing unit and Industry Standard Architecture ·
Conventional PCI
Conventional PCI, often shortened to PCI, is a local computer bus for attaching hardware devices in a computer.
Bus (computing) and Conventional PCI · Conventional PCI and Industry Standard Architecture ·
Direct memory access
Direct memory access (DMA) is a feature of computer systems that allows certain hardware subsystems to access main system memory (Random-access memory), independent of the central processing unit (CPU).
Bus (computing) and Direct memory access · Direct memory access and Industry Standard Architecture ·
Extended Industry Standard Architecture
The Extended Industry Standard Architecture (in practice almost always shortened to EISA and frequently pronounced "eee-suh") is a bus standard for IBM PC compatible computers.
Bus (computing) and Extended Industry Standard Architecture · Extended Industry Standard Architecture and Industry Standard Architecture ·
IBM
The International Business Machines Corporation (IBM) is an American multinational technology company headquartered in Armonk, New York, United States, with operations in over 170 countries.
Bus (computing) and IBM · IBM and Industry Standard Architecture ·
IBM Personal Computer
The IBM Personal Computer, commonly known as the IBM PC, is the original version and progenitor of the IBM PC compatible hardware platform.
Bus (computing) and IBM Personal Computer · IBM Personal Computer and Industry Standard Architecture ·
Industry Standard Architecture
Industry Standard Architecture (ISA) is a retronym term for the 16-bit internal bus of IBM PC/AT and similar computers based on the Intel 80286 and its immediate successors during the 1980s.
Bus (computing) and Industry Standard Architecture · Industry Standard Architecture and Industry Standard Architecture ·
List of interface bit rates
This is a list of interface bit rates, is a measure of information transfer rates, or digital bandwidth capacity, at which digital interfaces in a computer or network can communicate over various kinds of buses and channels.
Bus (computing) and List of interface bit rates · Industry Standard Architecture and List of interface bit rates ·
Low Pin Count
The Low Pin Count bus, or LPC bus, is a computer bus used on IBM-compatible personal computers to connect low-bandwidth devices to the CPU, such as the boot ROM, "legacy" I/O devices (integrated into a super I/O chip), and Trusted Platform Module (TPM).
Bus (computing) and Low Pin Count · Industry Standard Architecture and Low Pin Count ·
Memory-mapped I/O
Memory-mapped I/O (MMIO) and port-mapped I/O (PMIO) (which is also called isolated I/O) are two complementary methods of performing input/output (I/O) between the central processing unit (CPU) and peripheral devices in a computer.
Bus (computing) and Memory-mapped I/O · Industry Standard Architecture and Memory-mapped I/O ·
Micro Channel architecture
Micro Channel architecture, or the Micro Channel bus, was a proprietary 16- or 32-bit parallel computer bus introduced by IBM in 1987 which was used on PS/2 and other computers until the mid-1990s.
Bus (computing) and Micro Channel architecture · Industry Standard Architecture and Micro Channel architecture ·
NuBus
NuBus (pron. 'New Bus') is a 32-bit parallel computer bus, originally developed at MIT and standardized in 1987 as a part of the NuMachine workstation project.
Bus (computing) and NuBus · Industry Standard Architecture and NuBus ·
Parallel ATA
Parallel ATA (PATA), originally, is an interface standard for the connection of storage devices such as hard disk drives, floppy disk drives, and optical disc drives in computers.
Bus (computing) and Parallel ATA · Industry Standard Architecture and Parallel ATA ·
PC Card
In computing, PC Card is a configuration for computer parallel communication peripheral interface, designed for laptop computers.
Bus (computing) and PC Card · Industry Standard Architecture and PC Card ·
PC/104
PC/104 (or PC104) is a family of embedded computer standards which define both form factors and computer buses.
Bus (computing) and PC/104 · Industry Standard Architecture and PC/104 ·
PCI Express
PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe or PCI-e, is a high-speed serial computer expansion bus standard, designed to replace the older PCI, PCI-X, and AGP bus standards.
Bus (computing) and PCI Express · Industry Standard Architecture and PCI Express ·
Plug and play
In computing, a plug and play (PnP) device or computer bus, is one with a specification that facilitates the discovery of a hardware component in a system without the need for physical device configuration or user intervention in resolving resource conflicts.
Bus (computing) and Plug and play · Industry Standard Architecture and Plug and play ·
SCSI
Small Computer System Interface (SCSI) is a set of standards for physically connecting and transferring data between computers and peripheral devices.
Bus (computing) and SCSI · Industry Standard Architecture and SCSI ·
Serial ATA
Serial ATA (SATA, abbreviated from Serial AT Attachment) is a computer bus interface that connects host bus adapters to mass storage devices such as hard disk drives, optical drives, and solid-state drives.
Bus (computing) and Serial ATA · Industry Standard Architecture and Serial ATA ·
USB
USB (abbreviation of Universal Serial Bus), is an industry standard that was developed to define cables, connectors and protocols for connection, communication, and power supply between personal computers and their peripheral devices.
Bus (computing) and USB · Industry Standard Architecture and USB ·
VESA Local Bus
The VESA Local Bus (usually abbreviated to VL-Bus or VLB) was a short-lived expansion bus that was mostly used in personal computers.
Bus (computing) and VESA Local Bus · Industry Standard Architecture and VESA Local Bus ·
The list above answers the following questions
- What Bus (computing) and Industry Standard Architecture have in common
- What are the similarities between Bus (computing) and Industry Standard Architecture
Bus (computing) and Industry Standard Architecture Comparison
Bus (computing) has 156 relations, while Industry Standard Architecture has 90. As they have in common 25, the Jaccard index is 10.16% = 25 / (156 + 90).
References
This article shows the relationship between Bus (computing) and Industry Standard Architecture. To access each article from which the information was extracted, please visit:
