Similarities between Post (structural) and Timber framing
Post (structural) and Timber framing have 16 things in common (in Unionpedia): Column, Cruck, Framing (construction), Hammerbeam roof, Jettying, Nave, Post and lintel, Post in ground, Purlin, Rafter, Sill plate, Stave church, Tension (physics), Timber framing, Truss, Wall plate.
Column
A column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above to other structural elements below.
Column and Post (structural) · Column and Timber framing ·
Cruck
A cruck or crook frame is a curved timber, one of a pair, which supports the roof of a building, used particularly in England.
Cruck and Post (structural) · Cruck and Timber framing ·
Framing (construction)
Framing, in construction, is the fitting together of pieces to give a structure support and shape.
Framing (construction) and Post (structural) · Framing (construction) and Timber framing ·
Hammerbeam roof
A hammerbeam roof is a decorative, open timber roof truss typical of English Gothic architecture and has been called "...the most spectacular endeavour of the English Medieval carpenter." They are traditionally timber framed, using short beams projecting from the wall on which the rafters land, essentially a tie beam which has the middle cut out.
Hammerbeam roof and Post (structural) · Hammerbeam roof and Timber framing ·
Jettying
Jettying (jetty, jutty, getee (obsolete) from Old French getee, jette) is a building technique used in medieval timber-frame buildings in which an upper floor projects beyond the dimensions of the floor below.
Jettying and Post (structural) · Jettying and Timber framing ·
Nave
The nave is the central aisle of a basilica church, or the main body of a church (whether aisled or not) between its rear wall and the far end of its intersection with the transept at the chancel.
Nave and Post (structural) · Nave and Timber framing ·
Post and lintel
In architecture, post and lintel (also called prop and lintel or a trabeated system) is a building system where strong horizontal elements are held up by strong vertical elements with large spaces between them.
Post (structural) and Post and lintel · Post and lintel and Timber framing ·
Post in ground
Post in ground construction, also called earthfast or hole-set posts, is a type of construction in which vertical, roof-bearing timbers, called posts, are in direct contact with the ground.
Post (structural) and Post in ground · Post in ground and Timber framing ·
Purlin
In architecture, structural engineering or building, a purlin (or historically purline, purloyne, purling, perling) is any longitudinal, horizontal, structural member in a roof except a type of framing with what is called a crown plate.
Post (structural) and Purlin · Purlin and Timber framing ·
Rafter
A rafter is one of a series of sloped structural members that extend from the ridge or hip to the wall plate, downslope perimeter or eave, and that are designed to support the roof deck and its associated loads.
Post (structural) and Rafter · Rafter and Timber framing ·
Sill plate
A sill plate or sole plate in construction and architecture is the bottom horizontal member of a wall or building to which vertical members are attached.
Post (structural) and Sill plate · Sill plate and Timber framing ·
Stave church
A stave church is a medieval wooden Christian church building once common in north-western Europe.
Post (structural) and Stave church · Stave church and Timber framing ·
Tension (physics)
In physics, tension may be described as the pulling force transmitted axially by the means of a string, cable, chain, or similar one-dimensional continuous object, or by each end of a rod, truss member, or similar three-dimensional object; tension might also be described as the action-reaction pair of forces acting at each end of said elements.
Post (structural) and Tension (physics) · Tension (physics) and Timber framing ·
Timber framing
Timber framing and "post-and-beam" construction are traditional methods of building with heavy timbers, creating structures using squared-off and carefully fitted and joined timbers with joints secured by large wooden pegs.
Post (structural) and Timber framing · Timber framing and Timber framing ·
Truss
In engineering, a truss is a structure that "consists of two-force members only, where the members are organized so that the assemblage as a whole behaves as a single object".
Post (structural) and Truss · Timber framing and Truss ·
Wall plate
A plate or wall plate is a horizontal, structural, load-bearing member in wooden building framing.
Post (structural) and Wall plate · Timber framing and Wall plate ·
The list above answers the following questions
- What Post (structural) and Timber framing have in common
- What are the similarities between Post (structural) and Timber framing
Post (structural) and Timber framing Comparison
Post (structural) has 30 relations, while Timber framing has 312. As they have in common 16, the Jaccard index is 4.68% = 16 / (30 + 312).
References
This article shows the relationship between Post (structural) and Timber framing. To access each article from which the information was extracted, please visit: