Faster access than browser!
85 relations: Analog transmission, Angle modulation, AX.25, Baseband, Baud, Bipolar encoding, Bit error rate, Bit rate, Bit slip, Broadband, Cable modem, Capacitive coupling, Coded mark inversion, Coding, Coding theory, Constant-weight code, Data compression, Data conversion, Data transmission, DC bias, Differential coding, Differential Manchester encoding, Digital signal, Digital Signal 1, Disk density, E-NRZ-L, Eight-to-fourteen modulation, Encoder, Endec, Ethernet physical layer, EtherType, Fast Ethernet, Fibre Channel, Field-programmable gate array, Ground segment, High-bit-rate digital subscriber line, Hybrid ternary code, IEEE 1355, Index of electronics articles, Interpacket gap, Keying (telecommunications), List of interface bit rates, Logic block, Manchester code, Measurement while drilling, MLT-3 encoding, Modified AMI code, Modulation, Node-to-node data transfer, Non-return-to-zero, ..., On-off keying, Overhead, Paired disparity code, Passband, PCI Express, Phase shaped binary transmission, Phase-locked loop, Physical layer, Pulse shaping, Qualcomm code-excited linear prediction, Quaternary numeral system, Rai News24, Return to Zero, Return-to-zero, Run-length limited, Scrambler, SCSI, Self-clocking signal, Slepian–Wolf coding, Spectral efficiency, Symbol rate, Ternary signal, Transmission (telecommunications), Unipolar encoding, USB, USB (Communications), USB 3.0, Wire protocol, Wire speed, 10 Gigabit Ethernet, 2B1Q, 4B3T, 4B5B, 64b/66b encoding, 8b/10b encoding. Expand index (35 more) »
Analog transmission
Analog transmission is a transmission method of conveying information using a continuous signal which varies in amplitude, phase, or some other property in proportion to that information.
New!!: Line code and Analog transmission · See more »
Angle modulation
Angle modulation is a class of carrier modulation that is used in telecommunications transmission systems.
New!!: Line code and Angle modulation · See more »
AX.25
AX.25 (Amateur X.25) is a data link layer protocol derived from the X.25 protocol suite and designed for use by amateur radio operators.
New!!: Line code and AX.25 · See more »
Baseband
Baseband is a signal that has a very narrow and near-zero frequency range, i.e. a spectral magnitude that is nonzero only for frequencies in the vicinity of the origin (termed f.
New!!: Line code and Baseband · See more »
Baud
In telecommunication and electronics, baud (symbol: Bd) is a common measure of the speed of communication over a data channel.
New!!: Line code and Baud · See more »
Bipolar encoding
In telecommunication, bipolar encoding is a type of return-to-zero (RZ) line code, where two nonzero values are used, so that the three values are +, −, and zero.
New!!: Line code and Bipolar encoding · See more »
Bit error rate
In digital transmission, the number of bit errors is the number of received bits of a data stream over a communication channel that have been altered due to noise, interference, distortion or bit synchronization errors.
New!!: Line code and Bit error rate · See more »
Bit rate
In telecommunications and computing, bit rate (bitrate or as a variable R) is the number of bits that are conveyed or processed per unit of time.
New!!: Line code and Bit rate · See more »
Bit slip
In digital transmission, bit slip is the loss or gain of a bit or bits, caused by clock drift – variations in the respective clock rates of the transmitting and receiving devices.
New!!: Line code and Bit slip · See more »
Broadband
In telecommunications, broadband is wide bandwidth data transmission which transports multiple signals and traffic types.
New!!: Line code and Broadband · See more »
Cable modem
A cable modem is a type of network bridge that provides bi-directional data communication via radio frequency channels on a hybrid fibre-coaxial (HFC) and radio frequency over glass (RFoG) infrastructure.
New!!: Line code and Cable modem · See more »
Capacitive coupling
Capacitive coupling is the transfer of energy within an electrical network or between distant networks by means of displacement current between circuit(s) nodes, induced by the electric field.
New!!: Line code and Capacitive coupling · See more »
Coded mark inversion
In telecommunication, coded mark inversion (CMI) is a non-return-to-zero (NRZ) line code.
New!!: Line code and Coded mark inversion · See more »
Coding
Coding may refer to.
New!!: Line code and Coding · See more »
Coding theory
Coding theory is the study of the properties of codes and their respective fitness for specific applications.
New!!: Line code and Coding theory · See more »
Constant-weight code
In coding theory, a constant-weight code, also called an m-of-n code, is an error detection and correction code where all codewords share the same Hamming weight.
New!!: Line code and Constant-weight code · See more »
Data compression
In signal processing, data compression, source coding, or bit-rate reduction involves encoding information using fewer bits than the original representation.
New!!: Line code and Data compression · See more »
Data conversion
Data conversion is the conversion of computer data from one format to another.
New!!: Line code and Data conversion · See more »
Data transmission
Data transmission (also data communication or digital communications) is the transfer of data (a digital bitstream or a digitized analog signal) over a point-to-point or point-to-multipoint communication channel.
New!!: Line code and Data transmission · See more »
DC bias
When describing a periodic function in the time domain, the DC bias, DC component, DC offset, or DC coefficient is the mean amplitude of the waveform.
New!!: Line code and DC bias · See more »
Differential coding
In digital communications, differential coding is a technique used to provide unambiguous signal reception when using some types of modulation.
New!!: Line code and Differential coding · See more »
Differential Manchester encoding
Differential Manchester encoding is a line code in which data and clock signals are combined to form a single 2-level self-synchronizing data stream.
New!!: Line code and Differential Manchester encoding · See more »
Digital signal
A digital signal is a signal that is being used to represent data as a sequence of discrete values; at any given time it can only take on one of a finite number of values.
New!!: Line code and Digital signal · See more »
Digital Signal 1
Digital Signal 1 (DS1, sometimes DS-1) is a T-carrier signaling scheme devised by Bell Labs.
New!!: Line code and Digital Signal 1 · See more »
Disk density
Disk density is a capacity designation on magnetic storage, usually floppy disks.
New!!: Line code and Disk density · See more »
E-NRZ-L
In telecommunication, an enhanced-non-return-to-zero-level (E-NRZ-L) line code is a binary code in which 1s are represented as low level and 0s are represented as high level condition with no other neutral or rest condition, similar to Non-return-to-zero; However, the major enhancement over NRZ is the addition of a parity bit (usually odd parity) to the end of the bit stream.
New!!: Line code and E-NRZ-L · See more »
Eight-to-fourteen modulation
Eight-to-fourteen modulation (EFM) is a data encoding technique – formally, a line code – used by compact discs (CD), laserdiscs (LD) and pre-Hi-MD MiniDiscs.
New!!: Line code and Eight-to-fourteen modulation · See more »
Encoder
An encoder is a device, circuit, transducer, software program, algorithm or person that converts information from one format or code to another, for the purposes of standardization, speed or compression.
New!!: Line code and Encoder · See more »
Endec
In electronic communications, an endec is a device which acts as both an encoder and a decoder on a signal or data stream, either with the same or separate circuitry or algorithm.
New!!: Line code and Endec · See more »
Ethernet physical layer
The Ethernet physical layer is the physical layer functionality of the Ethernet family of computer network standards.
New!!: Line code and Ethernet physical layer · See more »
EtherType
EtherType is a two-octet field in an Ethernet frame.
New!!: Line code and EtherType · See more »
Fast Ethernet
In computer networking, Fast Ethernet is a collective term for a number of Ethernet standards that carry traffic at the nominal rate of 100 Mbit/s (the earlier Ethernet speed was 10 Mbit/s).
New!!: Line code and Fast Ethernet · See more »
Fibre Channel
Fibre Channel, or FC, is a high-speed network technology (commonly running at 1, 2, 4, 8, 16, 32, and 128 gigabit per second rates) providing in-order, lossless delivery of raw block data, primarily used to connect computer data storage to servers.
New!!: Line code and Fibre Channel · See more »
Field-programmable gate array
A field-programmable gate array (FPGA) is an integrated circuit designed to be configured by a customer or a designer after manufacturing hence "field-programmable".
New!!: Line code and Field-programmable gate array · See more »
Ground segment
A ground segment consists of all the ground-based elements of a spacecraft system used by operators and support personnel, as opposed to the space segment and user segment.
New!!: Line code and Ground segment · See more »
High-bit-rate digital subscriber line
High-bit-rate digital subscriber line (HDSL) is a telecommunications protocol standardized in 1994.
New!!: Line code and High-bit-rate digital subscriber line · See more »
Hybrid ternary code
In telecommunications, the hybrid (H-) ternary line code is a line code that operates on a hybrid principle combining the binary non-return-to-zero-level (NRZ-L) and the polar return-to-zero (RZ) codes.
New!!: Line code and Hybrid ternary code · See more »
IEEE 1355
IEEE Standard 1355-1995, IEC 14575, or ISO 14575 is a data communications standard for Heterogeneous Interconnect (HIC).
New!!: Line code and IEEE 1355 · See more »
Index of electronics articles
This is an index of articles relating to electronics and electricity or natural electricity and things that run on electricity and things that use or conduct electricity.
New!!: Line code and Index of electronics articles · See more »
Interpacket gap
In computer networking, a minimal pause may be required between network packets or network frames.
New!!: Line code and Interpacket gap · See more »
Keying (telecommunications)
Keying is a family of modulation forms where the modulating signal takes one of a specific (predetermined) number of values at all times.
New!!: Line code and Keying (telecommunications) · See more »
List of interface bit rates
This is a list of interface bit rates, is a measure of information transfer rates, or digital bandwidth capacity, at which digital interfaces in a computer or network can communicate over various kinds of buses and channels.
New!!: Line code and List of interface bit rates · See more »
Logic block
In computing, a logic block or configurable logic block (CLB) is a fundamental building block of field-programmable gate array (FPGA) technology.
New!!: Line code and Logic block · See more »
Manchester code
In telecommunication and data storage, Manchester code (also known as phase encoding, or PE) is a line code in which the encoding of each data bit is either low then high, or high then low, for equal time.
New!!: Line code and Manchester code · See more »
Measurement while drilling
A drilling rig is used to create a borehole or well (also called a wellbore) in the earth's sub-surface, for example in order to extract natural resources such as gas or oil.
New!!: Line code and Measurement while drilling · See more »
MLT-3 encoding
MLT-3 encoding (Multi-Level Transmit) is a line code (a signaling method used in a telecommunication system for transmission purposes) that uses three voltage levels.
New!!: Line code and MLT-3 encoding · See more »
Modified AMI code
Modified AMI codes are a digital telecommunications technique to maintain system synchronization.
New!!: Line code and Modified AMI code · See more »
Modulation
In electronics and telecommunications, modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal, with a modulating signal that typically contains information to be transmitted.
New!!: Line code and Modulation · See more »
Node-to-node data transfer
In telecommunications, node-to-node data transfer is the movement of data from one node of a network to the next.
New!!: Line code and Node-to-node data transfer · See more »
Non-return-to-zero
In telecommunication, a non-return-to-zero (NRZ) line code is a binary code in which ones are represented by one significant condition, usually a positive voltage, while zeros are represented by some other significant condition, usually a negative voltage, with no other neutral or rest condition.
New!!: Line code and Non-return-to-zero · See more »
On-off keying
On-off keying (OOK) denotes the simplest form of amplitude-shift keying (ASK) modulation that represents digital data at the presence or absence of a carrier wave.
New!!: Line code and On-off keying · See more »
Overhead
Overhead may be.
New!!: Line code and Overhead · See more »
Paired disparity code
In telecommunication, a paired disparity code is a line code in which at least one of the data characters is represented by two codewords of opposite disparity that are used in sequence so as to minimize the total disparity of a longer sequence of digits.
New!!: Line code and Paired disparity code · See more »
Passband
A passband is the range of frequencies or wavelengths that can pass through a filter.
New!!: Line code and Passband · See more »
PCI Express
PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe or PCI-e, is a high-speed serial computer expansion bus standard, designed to replace the older PCI, PCI-X, and AGP bus standards.
New!!: Line code and PCI Express · See more »
Phase shaped binary transmission
The PSBT (Phase Shaped Binary Transmission) is a type of modulation format for digital transmissions.
New!!: Line code and Phase shaped binary transmission · See more »
Phase-locked loop
A phase-locked loop or phase lock loop abbreviated as PLL is a control system that generates an output signal whose phase is related to the phase of an input signal.
New!!: Line code and Phase-locked loop · See more »
Physical layer
In the seven-layer OSI model of computer networking, the physical layer or layer 1 is the first and lowest layer.
New!!: Line code and Physical layer · See more »
Pulse shaping
In electronics and telecommunications, pulse shaping is the process of changing the waveform of transmitted pulses.
New!!: Line code and Pulse shaping · See more »
Qualcomm code-excited linear prediction
Qualcomm code-excited linear prediction (QCELP), also known as Qualcomm PureVoice, is a speech codec developed in 1994 by Qualcomm to increase the speech quality of the IS-96A codec earlier used in CDMA networks.
New!!: Line code and Qualcomm code-excited linear prediction · See more »
Quaternary numeral system
Quaternary is the base- numeral system.
New!!: Line code and Quaternary numeral system · See more »
Rai News24
Rai News 24 is Italy's first non-stop news and information channel, broadcast on digital terrestrial television in Italy and via satellite around Europe and North America.
New!!: Line code and Rai News24 · See more »
Return to Zero
Return to Zero may refer to.
New!!: Line code and Return to Zero · See more »
Return-to-zero
Return-to-zero (RZ or RTZ) describes a line code used in telecommunications signals in which the signal drops (returns) to zero between each pulse.
New!!: Line code and Return-to-zero · See more »
Run-length limited
Run-length limited or RLL coding is a line coding technique that is used to send arbitrary data over a communications channel with bandwidth limits.
New!!: Line code and Run-length limited · See more »
Scrambler
In telecommunications, a scrambler is a device that transposes or inverts signals or otherwise encodes a message at the sender's side to make the message unintelligible at a receiver not equipped with an appropriately set descrambling device.
New!!: Line code and Scrambler · See more »
SCSI
Small Computer System Interface (SCSI) is a set of standards for physically connecting and transferring data between computers and peripheral devices.
New!!: Line code and SCSI · See more »
Self-clocking signal
In telecommunications and electronics, a self-clocking signal is one that can be decoded without the need for a separate clock signal or other source of synchronization.
New!!: Line code and Self-clocking signal · See more »
Slepian–Wolf coding
In information theory and communication, the Slepian–Wolf coding, also known as the Slepian–Wolf bound, is a result in distributed source coding discovered by David Slepian and Jack Wolf in 1973.
New!!: Line code and Slepian–Wolf coding · See more »
Spectral efficiency
Spectral efficiency, spectrum efficiency or bandwidth efficiency refers to the information rate that can be transmitted over a given bandwidth in a specific communication system.
New!!: Line code and Spectral efficiency · See more »
Symbol rate
In digital communications, symbol rate, also known as baud rate and modulation rate, is the number of symbol changes, waveform changes, or signaling events, across the transmission medium per time unit using a digitally modulated signal or a line code.
New!!: Line code and Symbol rate · See more »
Ternary signal
In telecommunication, a ternary signal is a signal that can assume, at any given instant, one of three states or significant conditions, such as power level, phase position, pulse duration, or frequency.
New!!: Line code and Ternary signal · See more »
Transmission (telecommunications)
In telecommunications, transmission (abbreviations: TX, Xmit) is the process of sending and propagating an analogue or digital information signal over a physical point-to-point or point-to-multipoint transmission medium, either wired, optical fiber or wireless.
New!!: Line code and Transmission (telecommunications) · See more »
Unipolar encoding
Unipolar encoding is a line code.
New!!: Line code and Unipolar encoding · See more »
USB
USB (abbreviation of Universal Serial Bus), is an industry standard that was developed to define cables, connectors and protocols for connection, communication, and power supply between personal computers and their peripheral devices.
New!!: Line code and USB · See more »
USB (Communications)
This article provides information about the communications aspects of Universal Serial Bus, USB: Signaling, Protocols, Transactions.
New!!: Line code and USB (Communications) · See more »
USB 3.0
USB 3.0 is the third major version of the Universal Serial Bus (USB) standard for interfacing computers and electronic devices.
New!!: Line code and USB 3.0 · See more »
Wire protocol
In computer networking, a wire protocol refers to a way of getting data from point to point: A wire protocol is needed if more than one application has to interoperate.
New!!: Line code and Wire protocol · See more »
Wire speed
In computer networking, wire speed or wirespeed refers to the hypothetical peak physical layer net bitrate (useful information rate) of a cable (consisting of fiber-optical wires or copper wires) combined with a certain digital communication device, interface, or port.
New!!: Line code and Wire speed · See more »
10 Gigabit Ethernet
10 Gigabit Ethernet (10GE, 10GbE, or 10 GigE) is a group of computer networking technologies for transmitting Ethernet frames at a rate of 10 gigabits per second.
New!!: Line code and 10 Gigabit Ethernet · See more »
2B1Q
Two-binary, one-quaternary (2B1Q) is a line code used in the U interface of the Integrated Services Digital Network (ISDN) Basic Rate Interface (BRI) and the high-bit-rate digital subscriber line (HDSL).
New!!: Line code and 2B1Q · See more »
4B3T
4B3T, which stands for 4 (four) Binary 3 (three) Ternary, is a line encoding scheme used for ISDN PRI interface.
New!!: Line code and 4B3T · See more »
4B5B
In telecommunication, 4B5B is a form of data communications line code.
New!!: Line code and 4B5B · See more »
64b/66b encoding
In data networking and transmission, 64b/66b is a line code that transforms 64-bit data to 66-bit line code to provide enough state changes to allow reasonable clock recovery and alignment of the data stream at the receiver.
New!!: Line code and 64b/66b encoding · See more »
8b/10b encoding
In telecommunications, 8b/10b is a line code that maps 8-bit words to 10-bit symbols to achieve DC-balance and bounded disparity, and yet provide enough state changes to allow reasonable clock recovery.
New!!: Line code and 8b/10b encoding · See more »
Redirects here:
Baseband modulation, Baseband transmission, Digital baseband modulation, Encoding scheme, Line Code, Line coding, Line encoding.
References
[1] https://en.wikipedia.org/wiki/Line_code
