Similarities between Electronic waste and Printed circuit board
Electronic waste and Printed circuit board have 13 things in common (in Unionpedia): Fiberglass, Gold plating, Heat sink, Integrated circuit, Lead, Nickel, Plating, Polytetrafluoroethylene, Printed circuit board, Restriction of Hazardous Substances Directive, Solder, Thermosetting polymer, Tin.
Fiberglass
Fiberglass (US) or fibreglass (UK) is a common type of fiber-reinforced plastic using glass fiber.
Electronic waste and Fiberglass · Fiberglass and Printed circuit board ·
Gold plating
Gold plating is a method of depositing a thin layer of gold onto the surface of another metal, most often copper or silver (to make silver-gilt), by chemical or electrochemical plating.
Electronic waste and Gold plating · Gold plating and Printed circuit board ·
Heat sink
A heat sink (also commonly spelled heatsink) is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant, where it is dissipated away from the device, thereby allowing regulation of the device's temperature at optimal levels.
Electronic waste and Heat sink · Heat sink and Printed circuit board ·
Integrated circuit
An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small flat piece (or "chip") of semiconductor material, normally silicon.
Electronic waste and Integrated circuit · Integrated circuit and Printed circuit board ·
Lead
Lead is a chemical element with symbol Pb (from the Latin plumbum) and atomic number 82.
Electronic waste and Lead · Lead and Printed circuit board ·
Nickel
Nickel is a chemical element with symbol Ni and atomic number 28.
Electronic waste and Nickel · Nickel and Printed circuit board ·
Plating
Plating is a surface covering in which a metal is deposited on a conductive surface.
Electronic waste and Plating · Plating and Printed circuit board ·
Polytetrafluoroethylene
Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene that has numerous applications.
Electronic waste and Polytetrafluoroethylene · Polytetrafluoroethylene and Printed circuit board ·
Printed circuit board
A printed circuit board (PCB) mechanically supports and electrically connects electronic components or electrical components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate.
Electronic waste and Printed circuit board · Printed circuit board and Printed circuit board ·
Restriction of Hazardous Substances Directive
The Restriction of Hazardous Substances Directive 2002/95/EC, (RoHS 1), short for Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment, was adopted in February 2003 by the European Union.
Electronic waste and Restriction of Hazardous Substances Directive · Printed circuit board and Restriction of Hazardous Substances Directive ·
Solder
Solder (or in North America) is a fusible metal alloy used to create a permanent bond between metal workpieces.
Electronic waste and Solder · Printed circuit board and Solder ·
Thermosetting polymer
A thermoset, also called a thermosetting plastic, is a plastic that is irreversibly cured from a soft solid or viscous liquid, prepolymer or resin.
Electronic waste and Thermosetting polymer · Printed circuit board and Thermosetting polymer ·
Tin
Tin is a chemical element with the symbol Sn (from stannum) and atomic number 50.
The list above answers the following questions
- What Electronic waste and Printed circuit board have in common
- What are the similarities between Electronic waste and Printed circuit board
Electronic waste and Printed circuit board Comparison
Electronic waste has 148 relations, while Printed circuit board has 178. As they have in common 13, the Jaccard index is 3.99% = 13 / (148 + 178).
References
This article shows the relationship between Electronic waste and Printed circuit board. To access each article from which the information was extracted, please visit: