Similarities between 8×64mm S and 8mm Remington Magnum
8×64mm S and 8mm Remington Magnum have 17 things in common (in Unionpedia): Cartridge (firearms), Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives, Grain (unit), List of rifle cartridges, Litre, Percussion cap, Proof test, Rifling, Rim (firearms), Sectional density, Sporting Arms and Ammunition Manufacturers' Institute, Wildcat cartridge, .30-06 Springfield, .325 Winchester Short Magnum, 7.92×57mm Mauser, 8 mm caliber, 8×68mm S.
Cartridge (firearms)
A cartridge is a type of firearm ammunition packaging a projectile (bullet, shots or slug), a propellant substance (usually either smokeless powder or black powder) and an ignition device (primer) within a metallic, paper or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for the practical purpose of convenient transportation and handling during shooting.
8×64mm S and Cartridge (firearms) · 8mm Remington Magnum and Cartridge (firearms) ·
Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives
The Commission internationale permanente pour l'épreuve des armes à feu portatives ("Permanent International Commission for the Proof of Small Arms" – commonly abbreviated as C.I.P.) is an international organisation which sets standards for safety testing of firearms.
8×64mm S and Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives · 8mm Remington Magnum and Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives ·
Grain (unit)
A grain is a unit of measurement of mass, and in the troy weight, avoirdupois, and Apothecaries' system, equal to exactly.
8×64mm S and Grain (unit) · 8mm Remington Magnum and Grain (unit) ·
List of rifle cartridges
List of rifle cartridges, by category, then by name.
8×64mm S and List of rifle cartridges · 8mm Remington Magnum and List of rifle cartridges ·
Litre
The litre (SI spelling) or liter (American spelling) (symbols L or l, sometimes abbreviated ltr) is an SI accepted metric system unit of volume equal to 1 cubic decimetre (dm3), 1,000 cubic centimetres (cm3) or 1/1,000 cubic metre. A cubic decimetre (or litre) occupies a volume of 10 cm×10 cm×10 cm (see figure) and is thus equal to one-thousandth of a cubic metre. The original French metric system used the litre as a base unit. The word litre is derived from an older French unit, the litron, whose name came from Greek — where it was a unit of weight, not volume — via Latin, and which equalled approximately 0.831 litres. The litre was also used in several subsequent versions of the metric system and is accepted for use with the SI,, p. 124. ("Days" and "hours" are examples of other non-SI units that SI accepts.) although not an SI unit — the SI unit of volume is the cubic metre (m3). The spelling used by the International Bureau of Weights and Measures is "litre", a spelling which is shared by almost all English-speaking countries. The spelling "liter" is predominantly used in American English. One litre of liquid water has a mass of almost exactly one kilogram, because the kilogram was originally defined in 1795 as the mass of one cubic decimetre of water at the temperature of melting ice. Subsequent redefinitions of the metre and kilogram mean that this relationship is no longer exact.
8×64mm S and Litre · 8mm Remington Magnum and Litre ·
Percussion cap
The percussion cap, introduced circa 1820, is a type of single-use ignition device used on muzzleloading firearms that enabled them to fire reliably in any weather conditions.
8×64mm S and Percussion cap · 8mm Remington Magnum and Percussion cap ·
Proof test
A proof test is a form of stress test to demonstrate the fitness of a load-bearing structure.
8×64mm S and Proof test · 8mm Remington Magnum and Proof test ·
Rifling
In firearms, rifling is the helical groove pattern that is machined into the internal (bore) surface of a gun's barrel, for the purpose of exerting torque and thus imparting a spin to a projectile around its longitudinal axis during shooting.
8×64mm S and Rifling · 8mm Remington Magnum and Rifling ·
Rim (firearms)
A rim is an external flange that is machined, cast, molded, stamped or pressed around the bottom of a firearms cartridge.
8×64mm S and Rim (firearms) · 8mm Remington Magnum and Rim (firearms) ·
Sectional density
Sectional density is the ratio of an object's mass to its cross-sectional area with respect to a given axis.
8×64mm S and Sectional density · 8mm Remington Magnum and Sectional density ·
Sporting Arms and Ammunition Manufacturers' Institute
The Sporting Arms and Ammunition Manufacturers' Institute (SAAMI, pronounced "Sammy") is an association of American firearms and ammunition manufacturers.
8×64mm S and Sporting Arms and Ammunition Manufacturers' Institute · 8mm Remington Magnum and Sporting Arms and Ammunition Manufacturers' Institute ·
Wildcat cartridge
A wildcat cartridge, often shortened to wildcat, is a custom cartridge for which ammunition and/or firearms are not mass-produced.
8×64mm S and Wildcat cartridge · 8mm Remington Magnum and Wildcat cartridge ·
.30-06 Springfield
The.30-06 Springfield cartridge (pronounced "thirty-aught-six" or "thirty-oh-six"), 7.62×63mm in metric notation and called ".30 Gov't '06" by Winchester, was introduced to the United States Army in 1906 and later standardized; it remained in use until the early 1980s.
.30-06 Springfield and 8×64mm S · .30-06 Springfield and 8mm Remington Magnum ·
.325 Winchester Short Magnum
The.325 Winchester Short Magnum, commonly known as the 325 WSM is a 8mm caliber rebated rim bottlenecked centerfire short magnum medium bore cartridge.
.325 Winchester Short Magnum and 8×64mm S · .325 Winchester Short Magnum and 8mm Remington Magnum ·
7.92×57mm Mauser
The 7.92×57mm Mauser (designated as the 8mm Mauser or 8×57mm by the SAAMI and 8 × 57 IS by the C.I.P.) is a rimless bottlenecked rifle cartridge.
7.92×57mm Mauser and 8×64mm S · 7.92×57mm Mauser and 8mm Remington Magnum ·
8 mm caliber
This article lists firearm cartridges which have a bullet in the to caliber range.
8 mm caliber and 8×64mm S · 8 mm caliber and 8mm Remington Magnum ·
8×68mm S
The 8×68mm S rebated rim bottlenecked centerfire rifle cartridge (the S denoting it is intended for 8.2 mm (.323 in) groove diameter bullets) and its necked-down sister cartridge, the 6.5×68mm (no S, or other modifier required), were developed in the 1930s by August Schüler of the August Schüler Waffenfabrik, Suhl, Germany as magnum hunting cartridges that would just fit and function in standard-sized Mauser 98 bolt-action rifles.
The list above answers the following questions
- What 8×64mm S and 8mm Remington Magnum have in common
- What are the similarities between 8×64mm S and 8mm Remington Magnum
8×64mm S and 8mm Remington Magnum Comparison
8×64mm S has 38 relations, while 8mm Remington Magnum has 42. As they have in common 17, the Jaccard index is 21.25% = 17 / (38 + 42).
References
This article shows the relationship between 8×64mm S and 8mm Remington Magnum. To access each article from which the information was extracted, please visit: