Similarities between I-beam and Section modulus
I-beam and Section modulus have 4 things in common (in Unionpedia): Euler–Bernoulli beam theory, Neutral axis, Second moment of area, Yield (engineering).
Euler–Bernoulli beam theory
Euler–Bernoulli beam theory (also known as engineer's beam theory or classical beam theory)Timoshenko, S., (1953), History of strength of materials, McGraw-Hill New York is a simplification of the linear theory of elasticity which provides a means of calculating the load-carrying and deflection characteristics of beams.
Euler–Bernoulli beam theory and I-beam · Euler–Bernoulli beam theory and Section modulus ·
Neutral axis
The neutral axis is an axis in the cross section of a beam (a member resisting bending) or shaft along which there are no longitudinal stresses or strains.
I-beam and Neutral axis · Neutral axis and Section modulus ·
Second moment of area
The 2nd moment of area, also known as moment of inertia of plane area, area moment of inertia, or second area moment, is a geometrical property of an area which reflects how its points are distributed with regard to an arbitrary axis.
I-beam and Second moment of area · Second moment of area and Section modulus ·
Yield (engineering)
The yield point is the point on a stress–strain curve that indicates the limit of elastic behavior and the beginning of plastic behavior.
I-beam and Yield (engineering) · Section modulus and Yield (engineering) ·
The list above answers the following questions
- What I-beam and Section modulus have in common
- What are the similarities between I-beam and Section modulus
I-beam and Section modulus Comparison
I-beam has 60 relations, while Section modulus has 9. As they have in common 4, the Jaccard index is 5.80% = 4 / (60 + 9).
References
This article shows the relationship between I-beam and Section modulus. To access each article from which the information was extracted, please visit: