Faster access than browser!
111 relations: Aerospace engineering, American Precision Museum, Analytical dynamics, Arbor milling, Arbor support, Arsenal, ASME, Association for Manufacturing Technology, Automatic lathe, Backlash (engineering), Blade, Bridgeport (machine tool brand), Bridgeport, Connecticut, Brown & Sharpe, Caterpillar Inc., Cemented carbide, Cincinnati, Cincinnati Milling Machine Company, CNC router, Cobalt, Collet, Colt's Manufacturing Company, Commercialization, Computer, Computer-aided manufacturing, Cone, Cryogenic grinding, Cutting, Cutting fluid, Cutting tool (machining), Digital read out, Drawbar (machine tool), Drilling, Eccentric (mechanism), Eli Whitney, Elisha K. Root, End mill, Engraving, File (tool), Francis A. Pratt, Gear cutting, Generic trademark, Great man theory, Groove (engineering), Harpers Ferry Armory, High-speed steel, Indexing (motion), Indexing head, Inside contracting, Jacques de Vaucanson, ..., James Fox (engineer), James Nasmyth, Jig borer, John H. Hall (gunsmith), Joseph Wickham Roe, Kinetics (physics), Lathe, Line shaft, Machine taper, Machine tool, Machining, Machining time, Machining vibrations, Machinist, Mandrel, Mass noun, Matthew Murray, Mechanics, Middletown, Connecticut, Milling (machining), Milling cutter, Missile guidance, Multiaxis machining, Normal (geometry), Numerical control, Peoria, Illinois, Personal computer, Photochemical milling, Planer (metalworking), Printed circuit board milling, Relief, Rhode Island Tool Company building, Richard Roberts (engineer), Rotation around a fixed axis, Servomechanism, Shipbuilding, Simeon North, Small and medium-sized enterprises, Speeds and feeds, Spiral bevel gear, Springfield Armory, Stop block, Surface finish, Swarf, Technology transfer, Thomas Blanchard (inventor), Tool management, Tool wear, Toolroom, Trochoid, Turning, Turnover (employment), Turret lathe, Van Norman, Voronoi diagram, Wear, Workflow, World War I, World War II, 2.5D (machining), 3D printing. Expand index (61 more) »
Aerospace engineering
Aerospace engineering is the primary field of engineering concerned with the development of aircraft and spacecraft.
New!!: Milling (machining) and Aerospace engineering · See more »
American Precision Museum
The American Precision Museum is located in the renovated 1846 Robbins & Lawrence factory on South Main Street in Windsor, Vermont.
New!!: Milling (machining) and American Precision Museum · See more »
Analytical dynamics
In classical mechanics, analytical dynamics, or more briefly dynamics, is concerned with the relationship between motion of bodies and its causes, namely the forces acting on the bodies and the properties of the bodies, particularly mass and moment of inertia.
New!!: Milling (machining) and Analytical dynamics · See more »
Arbor milling
Arbor milling is a cutting process which removes material via a multi-toothed cutter.
New!!: Milling (machining) and Arbor milling · See more »
Arbor support
An arbor support is a device to support the outer end or intermediate point of an arbor.
New!!: Milling (machining) and Arbor support · See more »
Arsenal
An arsenal is a place where arms and ammunition are made, maintained and repaired, stored, or issued, in any combination, whether privately or publicly owned.
New!!: Milling (machining) and Arsenal · See more »
ASME
The American Society of Mechanical Engineers (ASME) is a professional association that, in its own words, "promotes the art, science, and practice of multidisciplinary engineering and allied sciences around the globe" via "continuing education, training and professional development, codes and standards, research, conferences and publications, government relations, and other forms of outreach." ASME is thus an engineering society, a standards organization, a research and development organization, a lobbying organization, a provider of training and education, and a nonprofit organization.
New!!: Milling (machining) and ASME · See more »
Association for Manufacturing Technology
The Association for Manufacturing Technology (AMT) is a trade association based in McLean, Virginia, in the United States.
New!!: Milling (machining) and Association for Manufacturing Technology · See more »
Automatic lathe
An automatic lathe is a lathe (usually a metalworking lathe) whose actions are controlled automatically.
New!!: Milling (machining) and Automatic lathe · See more »
Backlash (engineering)
In mechanical engineering, backlash, sometimes called lash or play, is a clearance or lost motion in a mechanism caused by gaps between the parts.
New!!: Milling (machining) and Backlash (engineering) · See more »
Blade
A blade is the portion of a tool, weapon, or machine with an edge that is designed to puncture, chop, slice or scrape surfaces or materials.
New!!: Milling (machining) and Blade · See more »
Bridgeport (machine tool brand)
Bridgeport is a brand of milling machines and machining centers, which are machine tools used in the machining industries.
New!!: Milling (machining) and Bridgeport (machine tool brand) · See more »
Bridgeport, Connecticut
Bridgeport is a historic seaport city in the U.S. state of Connecticut.
New!!: Milling (machining) and Bridgeport, Connecticut · See more »
Brown & Sharpe
Brown & Sharpe is a division of Hexagon AB, a Swedish multinational corporation focused mainly on metrological tools and technology.
New!!: Milling (machining) and Brown & Sharpe · See more »
Caterpillar Inc.
Caterpillar Inc. is an American Fortune 100 corporation which designs, develops, engineers, manufactures, markets and sells machinery, engines, financial products and insurance to customers via a worldwide dealer network.
New!!: Milling (machining) and Caterpillar Inc. · See more »
Cemented carbide
Cemented carbide is a hard material used extensively as cutting tool material, as well as other industrial applications.
New!!: Milling (machining) and Cemented carbide · See more »
Cincinnati
No description.
New!!: Milling (machining) and Cincinnati · See more »
Cincinnati Milling Machine Company
The Cincinnati Milling Machine Company was an American machine tool builder headquartered in Cincinnati, Ohio.
New!!: Milling (machining) and Cincinnati Milling Machine Company · See more »
CNC router
A computer numerical control (CNC) router is a computer-controlled cutting machine related to the hand-held router used for cutting various hard materials, such as wood, composites, aluminium, steel, plastics, and foams.
New!!: Milling (machining) and CNC router · See more »
Cobalt
Cobalt is a chemical element with symbol Co and atomic number 27.
New!!: Milling (machining) and Cobalt · See more »
Collet
A collet is a subtype of chuck that forms a collar around an object to be held and exerts a strong clamping force on the object when it is tightened, usually by means of a tapered outer collar.
New!!: Milling (machining) and Collet · See more »
Colt's Manufacturing Company
Colt's Manufacturing Company, LLC (CMC, formerly Colt's Patent Firearms Manufacturing Company) is an American firearms manufacturer, founded in 1855 by Samuel Colt.
New!!: Milling (machining) and Colt's Manufacturing Company · See more »
Commercialization
Commercialization or commercialisation is the process of introducing a new product or production method into commerce—making it available on the market.
New!!: Milling (machining) and Commercialization · See more »
Computer
A computer is a device that can be instructed to carry out sequences of arithmetic or logical operations automatically via computer programming.
New!!: Milling (machining) and Computer · See more »
Computer-aided manufacturing
Computer-aided manufacturing (CAM) is the use of software to control machine tools and related ones in the manufacturing of workpieces.
New!!: Milling (machining) and Computer-aided manufacturing · See more »
Cone
A cone is a three-dimensional geometric shape that tapers smoothly from a flat base (frequently, though not necessarily, circular) to a point called the apex or vertex.
New!!: Milling (machining) and Cone · See more »
Cryogenic grinding
Cyrogenic grinding, also known as freezer milling, freezer grinding, and cryomilling, is the act of cooling or chilling a material and then reducing it into a small particle size.
New!!: Milling (machining) and Cryogenic grinding · See more »
Cutting
Cutting is the separation or opening of a physical object, into two or more portions, through the application of an acutely directed force.
New!!: Milling (machining) and Cutting · See more »
Cutting fluid
Cutting fluid is a type of coolant and lubricant designed specifically for metalworking processes, such as machining and stamping.
New!!: Milling (machining) and Cutting fluid · See more »
Cutting tool (machining)
In the context of machining, a cutting tool or cutter is any tool that is used to remove material from the work piece by means of shear deformation.
New!!: Milling (machining) and Cutting tool (machining) · See more »
Digital read out
A digital readout (DRO) is a numeric display, usually with an integrated keyboard and some means of numeric representation.
New!!: Milling (machining) and Digital read out · See more »
Drawbar (machine tool)
A drawbar or spindle drawbar is a clamping mechanism for toolholders on machine tools.
New!!: Milling (machining) and Drawbar (machine tool) · See more »
Drilling
Drilling is a cutting process that uses a drill bit to cut a hole of circular cross-section in solid materials.
New!!: Milling (machining) and Drilling · See more »
Eccentric (mechanism)
In mechanical engineering, an eccentric is a circular disk (eccentric sheave) solidly fixed to a rotating axle with its centre offset from that of the axle (hence the word "eccentric", out of the centre).
New!!: Milling (machining) and Eccentric (mechanism) · See more »
Eli Whitney
Eli Whitney (December 8, 1765 – January 8, 1825) was an American inventor best known for inventing the cotton gin.
New!!: Milling (machining) and Eli Whitney · See more »
Elisha K. Root
Elisha King Root (May 5, 1808 - September 1, 1865) was a Connecticut machinist, inventor, and President of Colt's Manufacturing Company.
New!!: Milling (machining) and Elisha K. Root · See more »
End mill
An end mill is a type of milling cutter, a cutting tool used in industrial milling applications.
New!!: Milling (machining) and End mill · See more »
Engraving
Engraving is the practice of incising a design onto a hard, usually flat surface by cutting grooves into it.
New!!: Milling (machining) and Engraving · See more »
File (tool)
A file is a tool used to remove fine amounts of material from a workpiece.
New!!: Milling (machining) and File (tool) · See more »
Francis A. Pratt
Francis Ashbury Pratt (February 15, 1827 – February 10, 1902) was a Connecticut mechanical engineer, inventor, and co-founder of Pratt & Whitney.
New!!: Milling (machining) and Francis A. Pratt · See more »
Gear cutting
Gear cutting is any machining process for creating a gear.
New!!: Milling (machining) and Gear cutting · See more »
Generic trademark
A generic trademark, also known as a genericized trademark or proprietary eponym, is a trademark or brand name that, due to its popularity or significance, has become the generic name for, or synonymous with, a general class of product or service, usually against the intentions of the trademark's holder.
New!!: Milling (machining) and Generic trademark · See more »
Great man theory
The great man theory is a 19th-century idea according to which history can be largely explained by the impact of great men, or heroes; highly influential individuals who, due to either their personal charisma, intelligence, wisdom, or political skill used their power in a way that had a decisive historical impact.
New!!: Milling (machining) and Great man theory · See more »
Groove (engineering)
In manufacturing or mechanical engineering a groove is a long and narrow indentation built into a material, generally for the purpose of allowing another material or part to move within the groove and be guided by it.
New!!: Milling (machining) and Groove (engineering) · See more »
Harpers Ferry Armory
Harpers Ferry Armory, more formally known as the United States Armory and Arsenal at Harpers Ferry, was the second federal armory commissioned by the United States government.
New!!: Milling (machining) and Harpers Ferry Armory · See more »
High-speed steel
High-speed steel (HSS or HS) is a subset of tool steels, commonly used as cutting tool material.
New!!: Milling (machining) and High-speed steel · See more »
Indexing (motion)
Indexing in reference to motion is moving (or being moved) into a new position or location quickly and easily but also precisely.
New!!: Milling (machining) and Indexing (motion) · See more »
Indexing head
An indexing head, also known as a dividing head or spiral head, is a specialized tool that allows a workpiece to be circularly indexed; that is, easily and precisely rotated to preset angles or circular divisions.
New!!: Milling (machining) and Indexing head · See more »
Inside contracting
Inside contracting is the practice of hiring contractors who work inside the proprietor's factory.
New!!: Milling (machining) and Inside contracting · See more »
Jacques de Vaucanson
Jacques de Vaucanson (February 24, 1709 – November 21, 1782) was a French inventor and artist who was responsible for the creation of impressive and innovative automata.
New!!: Milling (machining) and Jacques de Vaucanson · See more »
James Fox (engineer)
James Fox, (fl 1780–1830), machine tool maker, was originally a butler in the service of the Rev.
New!!: Milling (machining) and James Fox (engineer) · See more »
James Nasmyth
James Hall Nasmyth (sometimes spelled Naesmyth, Nasmith, or Nesmyth) (19 August 1808 – 7 May 1890) was a Scottish engineer, philosopher, artist and inventor famous for his development of the steam hammer.
New!!: Milling (machining) and James Nasmyth · See more »
Jig borer
The jig borer is a type of machine tool invented at the end of World War I to make possible the location of hole centers quickly and precisely.
New!!: Milling (machining) and Jig borer · See more »
John H. Hall (gunsmith)
John Hancock Hall (January 4, 1781 – February 26, 1841) was the inventor of the M1819 Hall breech-loading rifle and a mass production innovator.
New!!: Milling (machining) and John H. Hall (gunsmith) · See more »
Joseph Wickham Roe
Joseph Wickham Roe (1871 - 1960) was an American engineer and Professor of Industrial Engineering at the New York University, known for his seminal work on machine tools and machine tool builders history.
New!!: Milling (machining) and Joseph Wickham Roe · See more »
Kinetics (physics)
In physics and engineering, kinetics is the branch of classical mechanics that is concerned with the relationship between motion and its causes, specifically, forces and torques.
New!!: Milling (machining) and Kinetics (physics) · See more »
Lathe
A lathe is a tool that rotates the workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling, drilling, deformation, facing, and turning, with tools that are applied to the workpiece to create an object with symmetry about that axis.
New!!: Milling (machining) and Lathe · See more »
Line shaft
A line shaft is a power driven rotating shaft for power transmission that was used extensively from the Industrial Revolution until the early 20th century.
New!!: Milling (machining) and Line shaft · See more »
Machine taper
A machine taper is a system for securing cutting tools or toolholders in the spindle of a machine tool or power tool.
New!!: Milling (machining) and Machine taper · See more »
Machine tool
A machine tool is a machine for shaping or machining metal or other rigid materials, usually by cutting, boring, grinding, shearing, or other forms of deformation.
New!!: Milling (machining) and Machine tool · See more »
Machining
Machining is any of various processes in which a piece of raw material is cut into a desired final shape and size by a controlled material-removal process.
New!!: Milling (machining) and Machining · See more »
Machining time
Machining time is the time when a machine is actually processing something.
New!!: Milling (machining) and Machining time · See more »
Machining vibrations
Machining vibrations, also called chatter, correspond to the relative movement between the workpiece and the cutting tool.
New!!: Milling (machining) and Machining vibrations · See more »
Machinist
A machinist is a person who machines using hand tools and machine tools to prototype, fabricate or make modifications to a part that is made of metal, plastics, or wood.
New!!: Milling (machining) and Machinist · See more »
Mandrel
A mandrel (also mandril or arbor) is one of the following.
New!!: Milling (machining) and Mandrel · See more »
Mass noun
In linguistics, a mass noun, uncountable noun, or non-count noun is a noun with the syntactic property that any quantity of it is treated as an undifferentiated unit, rather than as something with discrete subsets.
New!!: Milling (machining) and Mass noun · See more »
Matthew Murray
Matthew Murray (1765 – 20 February 1826) was an English steam engine and machine tool manufacturer, who designed and built the first commercially viable steam locomotive, the twin cylinder Salamanca in 1812.
New!!: Milling (machining) and Matthew Murray · See more »
Mechanics
Mechanics (Greek μηχανική) is that area of science concerned with the behaviour of physical bodies when subjected to forces or displacements, and the subsequent effects of the bodies on their environment.
New!!: Milling (machining) and Mechanics · See more »
Middletown, Connecticut
Middletown is a city located in Middlesex County, Connecticut, along the Connecticut River, in the central part of the state, 16 miles (26 km) south of Hartford.
New!!: Milling (machining) and Middletown, Connecticut · See more »
Milling (machining)
Milling is the machining process of using rotary cutters to remove material from a workpiece by advancing (or feeding) the cutter into the workpiece at a certain direction.
New!!: Milling (machining) and Milling (machining) · See more »
Milling cutter
Milling cutters are cutting tools typically used in milling machines or machining centres to perform milling operations (and occasionally in other machine tools).
New!!: Milling (machining) and Milling cutter · See more »
Missile guidance
Missile guidance refers to a variety of methods of guiding a missile or a guided bomb to its intended target.
New!!: Milling (machining) and Missile guidance · See more »
Multiaxis machining
Multiaxis machining is a manufacturing process where computer numerically controlled tools that move in 4 or more ways are used to manufacture parts out of metal or other materials by milling away excess material, by water jet cutting or by laser cutting.
New!!: Milling (machining) and Multiaxis machining · See more »
Normal (geometry)
In geometry, a normal is an object such as a line or vector that is perpendicular to a given object.
New!!: Milling (machining) and Normal (geometry) · See more »
Numerical control
Computer numerical control (CNC) is the automation of machine tools by means of computers executing pre-programmed sequences of machine control commands.
New!!: Milling (machining) and Numerical control · See more »
Peoria, Illinois
Peoria is the county seat of Peoria County, Illinois, and the largest city on the Illinois River.
New!!: Milling (machining) and Peoria, Illinois · See more »
Personal computer
A personal computer (PC) is a multi-purpose computer whose size, capabilities, and price make it feasible for individual use.
New!!: Milling (machining) and Personal computer · See more »
Photochemical milling
Photochemical milling may refer to.
New!!: Milling (machining) and Photochemical milling · See more »
Planer (metalworking)
A planer is a type of metalworking machine tool that uses linear relative motion between the workpiece and a single-point cutting tool to cut the work piece.
New!!: Milling (machining) and Planer (metalworking) · See more »
Printed circuit board milling
Printed circuit board milling (also: isolation milling) is the process of removing areas of copper from a sheet of printed circuit board material to recreate the pads, signal traces and structures according to patterns from a digital circuit board plan known as a layout file.
New!!: Milling (machining) and Printed circuit board milling · See more »
Relief
Relief is a sculptural technique where the sculpted elements remain attached to a solid background of the same material.
New!!: Milling (machining) and Relief · See more »
Rhode Island Tool Company building
The Rhode Island Tool Company is a historic industrial property at 146-148 West River Street in Providence, Rhode Island.
New!!: Milling (machining) and Rhode Island Tool Company building · See more »
Richard Roberts (engineer)
Richard Roberts (22 April 1789 – 11 March 1864) was a British patternmaker and engineer whose development of high-precision machine tools contributed to the birth of production engineering and mass production.
New!!: Milling (machining) and Richard Roberts (engineer) · See more »
Rotation around a fixed axis
Rotation around a fixed axis or about a fixed axis of revolution or motion with respect to a fixed axis of rotation is a special case of rotational motion.
New!!: Milling (machining) and Rotation around a fixed axis · See more »
Servomechanism
In control engineering a servomechanism, sometimes shortened to servo, is an automatic device that uses error-sensing negative feedback to correct the action of a mechanism.
New!!: Milling (machining) and Servomechanism · See more »
Shipbuilding
Shipbuilding is the construction of ships and other floating vessels.
New!!: Milling (machining) and Shipbuilding · See more »
Simeon North
Simeon North (July 13, 1765 – August 25, 1852) was a Middletown, Connecticut, gun manufacturer, who developed one of America's first milling machines (possibly the very first) in 1818 and played an important role in the development of interchangeable parts manufacturing.
New!!: Milling (machining) and Simeon North · See more »
Small and medium-sized enterprises
Small and medium-sized enterprises (SMEs, also small and medium enterprises) or small and medium-sized businesses (SMBs) are businesses whose personnel numbers fall below certain limits.
New!!: Milling (machining) and Small and medium-sized enterprises · See more »
Speeds and feeds
The phrase speeds and feeds or feeds and speeds refers to two separate velocities in machine tool practice, cutting speed and feed rate.
New!!: Milling (machining) and Speeds and feeds · See more »
Spiral bevel gear
A spiral bevel gear is a bevel gear with helical teeth.
New!!: Milling (machining) and Spiral bevel gear · See more »
Springfield Armory
The Springfield Armory, located in the city of Springfield, Massachusetts, was the primary center for the manufacture of United States military firearms from 1777 until its closing in 1968, it was one of the first companies dedicated to the manufacture of weapons.
New!!: Milling (machining) and Springfield Armory · See more »
Stop block
A stop block is a simple reusable jig used in metalworking and woodworking to locate a common edge of a workpiece so that multiple workpieces can get the same operation performed quickly.
New!!: Milling (machining) and Stop block · See more »
Surface finish
Surface finish, also known as surface texture or surface topography, is the nature of a surface as defined by the three characteristics of lay, surface roughness, and waviness.
New!!: Milling (machining) and Surface finish · See more »
Swarf
Swarf, also known as chips or by other process-specific names (such as turnings, filings, or shavings), are pieces of metal, wood, or plastic that are the debris or waste resulting from machining, woodworking, or similar subtractive (material-removing) manufacturing processes.
New!!: Milling (machining) and Swarf · See more »
Technology transfer
Technology transfer, also called transfer of technology (TOT), is the process of transferring (disseminating) technology from the places and ingroups of its origination to wider distribution among more people and places.
New!!: Milling (machining) and Technology transfer · See more »
Thomas Blanchard (inventor)
Thomas Blanchard (June 24, 1788 – April 16, 1864) was an American inventor who lived much of his life in Springfield, Massachusetts, where in 1819, he pioneered the assembly line style of mass production in America, and also invented the major technological innovation known as interchangeable parts.
New!!: Milling (machining) and Thomas Blanchard (inventor) · See more »
Tool management
Tool management is needed in metalworking so that the information regarding the tools on hand can be uniformly organized and integrated.
New!!: Milling (machining) and Tool management · See more »
Tool wear
Tool wear describes the gradual failure of cutting tools due to regular operation.
New!!: Milling (machining) and Tool wear · See more »
Toolroom
A toolroom is a room where tools are stored or, in a factory, a space where tools are made and repaired for use throughout the rest of the factory.
New!!: Milling (machining) and Toolroom · See more »
Trochoid
A cycloid (a common '''trochoid''') generated by a rolling circle A trochoid (from the Greek word for wheel, "trochos") is the curve described by a fixed point on a circle as it rolls along a straight line.
New!!: Milling (machining) and Trochoid · See more »
Turning
Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates.
New!!: Milling (machining) and Turning · See more »
Turnover (employment)
In human resources context, turnover is the act of replacing an employee with a new employee.
New!!: Milling (machining) and Turnover (employment) · See more »
Turret lathe
The turret lathe is a form of metalworking lathe that is used for repetitive production of duplicate parts, which by the nature of their cutting process are usually interchangeable.
New!!: Milling (machining) and Turret lathe · See more »
Van Norman
The Van Norman Machine Tool Company was an American machine tool builder from late in the 19th century until the mid-1980s.
New!!: Milling (machining) and Van Norman · See more »
Voronoi diagram
In mathematics, a Voronoi diagram is a partitioning of a plane into regions based on distance to points in a specific subset of the plane.
New!!: Milling (machining) and Voronoi diagram · See more »
Wear
Wear is the damaging, gradual removal or deformation of material at solid surfaces.
New!!: Milling (machining) and Wear · See more »
Workflow
A workflow consists of an orchestrated and repeatable pattern of business activity enabled by the systematic organization of resources into processes that transform materials, provide services, or process information.
New!!: Milling (machining) and Workflow · See more »
World War I
World War I (often abbreviated as WWI or WW1), also known as the First World War, the Great War, or the War to End All Wars, was a global war originating in Europe that lasted from 28 July 1914 to 11 November 1918.
New!!: Milling (machining) and World War I · See more »
World War II
World War II (often abbreviated to WWII or WW2), also known as the Second World War, was a global war that lasted from 1939 to 1945, although conflicts reflecting the ideological clash between what would become the Allied and Axis blocs began earlier.
New!!: Milling (machining) and World War II · See more »
2.5D (machining)
In machining, 2.5D refers to a surface which is a projection of a plane into 3rd dimension – although the object is 3-dimensional, there are no overhanging elements possible.
New!!: Milling (machining) and 2.5D (machining) · See more »
3D printing
3D printing is any of various processes in which material is joined or solidified under computer control to create a three-dimensional object, with material being added together (such as liquid molecules or powder grains being fused together).
New!!: Milling (machining) and 3D printing · See more »
Redirects here:
CNC pocket milling, Gang milling, Gang milling operation, Horizontal milling center, Lincoln Miller, Lincoln miller, Machining center, Milling center, Milling machine, Milling machines, Universal milling machine.
References
[1] https://en.wikipedia.org/wiki/Milling_(machining)
