Faster access than browser!
70 relations: Akinfiy Nikitich Demidov, Alvord Lake Bridge, American Concrete Institute, Basalt fiber, Beam (structure), Brick, Buckling, C.A.P. Turner, Carbon, Carbon fiber reinforced polymer, Cast iron, Château de Vincennes, Chemical composition, Chromium, Column, Compression (physics), Concrete, Concrete cover, Corrosion, Cypress Street Viaduct, Deformation (mechanics), Ductility, Earthquake, EN 10080, Epoxy, Ernest L. Ransome, Fibre-reinforced plastic, Formwork, Fusion bonded epoxy coating, Galvanization, Glass fiber, Grout, Hydraulics, Joseph Monier, Joseph-Louis Lambot, Julius Kahn (inventor), Leaning Tower of Nevyansk, Lightning rod, Masonry, Mechanical connections, Mortar (masonry), Oxide jacking, Pascal (unit), Permeability (electromagnetism), PH, Pounds per square inch, Prestressed concrete, Rebar spacer, Recycling, Reinforced concrete, ..., Rust, Shear strength, Spall, Specified Minimum Yield Strength, Spot welding, Stainless steel, Steel, Steel fixer, Stress (mechanics), Structural integrity and failure, Structural load, Tempering (metallurgy), Tension (physics), Tented roof, Thaddeus Hyatt, Thermal expansion, Thermomechanical processing, Ultimate tensile strength, Yield (engineering), 1989 Loma Prieta earthquake. Expand index (20 more) »
Akinfiy Nikitich Demidov
Akinfiy Nikitich Demidov (Акинфий Никитич Демидов) (1678 – 5 August 1745) was a Russian industrialist of the Demidov family.
New!!: Rebar and Akinfiy Nikitich Demidov · See more »
Alvord Lake Bridge
The Alvord Lake Bridge was the first reinforced concrete bridge built in America.
New!!: Rebar and Alvord Lake Bridge · See more »
American Concrete Institute
The American Concrete Institute (ACI, formerly National Association of Cement Users or NACU) is a non-profit technical society and standards developing organization.
New!!: Rebar and American Concrete Institute · See more »
Basalt fiber
Basalt fiber is a material made from extremely fine fibers of basalt, which is composed of the minerals plagioclase, pyroxene, and olivine.
New!!: Rebar and Basalt fiber · See more »
Beam (structure)
A beam is a structural element that primarily resists loads applied laterally to the beam's axis.
New!!: Rebar and Beam (structure) · See more »
Brick
A brick is building material used to make walls, pavements and other elements in masonry construction.
New!!: Rebar and Brick · See more »
Buckling
In science, buckling is a mathematical instability that leads to a failure mode.
New!!: Rebar and Buckling · See more »
C.A.P. Turner
Claude Allen Porter Turner (July 4, 1869 – January 10, 1955) was an American structural engineer who designed a number of buildings and bridges, particularly in the midwestern U.S. states of Iowa, Minnesota, and Wisconsin.
New!!: Rebar and C.A.P. Turner · See more »
Carbon
Carbon (from carbo "coal") is a chemical element with symbol C and atomic number 6.
New!!: Rebar and Carbon · See more »
Carbon fiber reinforced polymer
Carbon fiber reinforced polymer, carbon fiber reinforced plastic or carbon fiber reinforced thermoplastic (CFRP, CRP, CFRTP or often simply carbon fiber, carbon composite or even carbon), is an extremely strong and light fiber-reinforced plastic which contains carbon fibers.
New!!: Rebar and Carbon fiber reinforced polymer · See more »
Cast iron
Cast iron is a group of iron-carbon alloys with a carbon content greater than 2%.
New!!: Rebar and Cast iron · See more »
Château de Vincennes
The Château de Vincennes is a massive 14th and 17th century French royal fortress in the town of Vincennes, to the east of Paris, now a suburb of the metropolis.
New!!: Rebar and Château de Vincennes · See more »
Chemical composition
Chemical composition refers to the identity and relative number of the chemical elements that make up any particular compound.
New!!: Rebar and Chemical composition · See more »
Chromium
Chromium is a chemical element with symbol Cr and atomic number 24.
New!!: Rebar and Chromium · See more »
Column
A column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above to other structural elements below.
New!!: Rebar and Column · See more »
Compression (physics)
In mechanics, compression is the application of balanced inward ("pushing") forces to different points on a material or structure, that is, forces with no net sum or torque directed so as to reduce its size in one or more directions.
New!!: Rebar and Compression (physics) · See more »
Concrete
Concrete, usually Portland cement concrete, is a composite material composed of fine and coarse aggregate bonded together with a fluid cement (cement paste) that hardens over time—most frequently a lime-based cement binder, such as Portland cement, but sometimes with other hydraulic cements, such as a calcium aluminate cement.
New!!: Rebar and Concrete · See more »
Concrete cover
Concrete cover, in reinforced concrete, is the least distance between the surface of embedded reinforcement and the outer surface of the concrete (ACI 130).
New!!: Rebar and Concrete cover · See more »
Corrosion
Corrosion is a natural process, which converts a refined metal to a more chemically-stable form, such as its oxide, hydroxide, or sulfide.
New!!: Rebar and Corrosion · See more »
Cypress Street Viaduct
The Cypress Street Viaduct, often referred to as the Cypress Structure, was a 1.6 mile long, raised two-tier, multi-lane (four lanes per deck) freeway constructed of reinforced concrete that was originally part of the Nimitz Freeway (State Route 17, and later, Interstate 880) in Oakland, California.
New!!: Rebar and Cypress Street Viaduct · See more »
Deformation (mechanics)
Deformation in continuum mechanics is the transformation of a body from a reference configuration to a current configuration.
New!!: Rebar and Deformation (mechanics) · See more »
Ductility
Ductility is a measure of a material's ability to undergo significant plastic deformation before rupture, which may be expressed as percent elongation or percent area reduction from a tensile test.
New!!: Rebar and Ductility · See more »
Earthquake
An earthquake (also known as a quake, tremor or temblor) is the shaking of the surface of the Earth, resulting from the sudden release of energy in the Earth's lithosphere that creates seismic waves.
New!!: Rebar and Earthquake · See more »
EN 10080
The EN 10080: Steel for the reinforcement of concrete is a European Standard.
New!!: Rebar and EN 10080 · See more »
Epoxy
Epoxy is either any of the basic components or the cured end products of epoxy resins, as well as a colloquial name for the epoxide functional group.
New!!: Rebar and Epoxy · See more »
Ernest L. Ransome
Ernest Leslie Ransome (1852–1917) was an English-born engineer, architect, and early innovator in reinforced concrete building techniques.
New!!: Rebar and Ernest L. Ransome · See more »
Fibre-reinforced plastic
Fibre-reinforced plastic (FRP) (also called fiber-reinforced polymer, or fiber-reinforced plastic) is a composite material made of a polymer matrix reinforced with fibres.
New!!: Rebar and Fibre-reinforced plastic · See more »
Formwork
Formwork is temporary or permanent molds into which concrete or similar materials are poured.
New!!: Rebar and Formwork · See more »
Fusion bonded epoxy coating
Fusion bonded epoxy coating, also known as fusion-bond epoxy powder coating and commonly referred to as FBE coating, is an epoxy-based powder coating that is widely used to protect steel pipe used in pipeline construction, concrete reinforcing bars (rebar) and on a wide variety of piping connections, valves etc.
New!!: Rebar and Fusion bonded epoxy coating · See more »
Galvanization
Galvanization or galvanizing is the process of applying a protective zinc coating to steel or iron, to prevent rusting.
New!!: Rebar and Galvanization · See more »
Glass fiber
Glass fiber (or glass fibre) is a material consisting of numerous extremely fine fibers of glass.
New!!: Rebar and Glass fiber · See more »
Grout
Grout is a fluid form of concrete used to fill gaps.
New!!: Rebar and Grout · See more »
Hydraulics
Hydraulics (from Greek: Υδραυλική) is a technology and applied science using engineering, chemistry, and other sciences involving the mechanical properties and use of liquids.
New!!: Rebar and Hydraulics · See more »
Joseph Monier
Joseph Monier (8 November 1823, Saint-Quentin-la-Poterie, France – 13 March 1906, Paris) was a French gardener and one of the principal inventors of reinforced concrete.
New!!: Rebar and Joseph Monier · See more »
Joseph-Louis Lambot
Joseph-Louis Lambot (born 22 May 1814 in Montfort sur Argens; died 2 August 1887 in Brignoles), is the inventor of ferro-cement, which led to the development of what is now known as reinforced concrete.
New!!: Rebar and Joseph-Louis Lambot · See more »
Julius Kahn (inventor)
Julius Kahn (March 8, 1874 – November 4, 1942) was an engineer, industrialist, and manufacturer.
New!!: Rebar and Julius Kahn (inventor) · See more »
Leaning Tower of Nevyansk
The Leaning Tower of Nevyansk (Невья́нская ба́шня) is a tower in the town of Nevyansk in Sverdlovsk Oblast, Russia, built in the 18th century.
New!!: Rebar and Leaning Tower of Nevyansk · See more »
Lightning rod
A lightning rod (US, AUS) or lightning conductor (UK) is a metal rod mounted on a structure and intended to protect the structure from a lightning strike.
New!!: Rebar and Lightning rod · See more »
Masonry
Masonry is the building of structures from individual units, which are often laid in and bound together by mortar; the term masonry can also refer to the units themselves.
New!!: Rebar and Masonry · See more »
Mechanical connections
Mechanical rebar connections, also known as mechanical splices, are used to join lengths of rebar together.
New!!: Rebar and Mechanical connections · See more »
Mortar (masonry)
Mortar is a workable paste used to bind building blocks such as stones, bricks, and concrete masonry units together, fill and seal the irregular gaps between them, and sometimes add decorative colors or patterns in masonry walls.
New!!: Rebar and Mortar (masonry) · See more »
Oxide jacking
The expansive force of rusting, which may be called oxide jacking or rust burst, is a phenomenon that can cause damage to structures made of stone, masonry, concrete or ceramics, and reinforced with metal components.
New!!: Rebar and Oxide jacking · See more »
Pascal (unit)
The pascal (symbol: Pa) is the SI derived unit of pressure used to quantify internal pressure, stress, Young's modulus and ultimate tensile strength.
New!!: Rebar and Pascal (unit) · See more »
Permeability (electromagnetism)
In electromagnetism, permeability is the measure of the ability of a material to support the formation of a magnetic field within itself.
New!!: Rebar and Permeability (electromagnetism) · See more »
PH
In chemistry, pH is a logarithmic scale used to specify the acidity or basicity of an aqueous solution.
New!!: Rebar and PH · See more »
Pounds per square inch
The pound per square inch or, more accurately, pound-force per square inch (symbol: lbf/in2; abbreviation: psi) is a unit of pressure or of stress based on avoirdupois units.
New!!: Rebar and Pounds per square inch · See more »
Prestressed concrete
Prestressed concrete is a form of concrete used in construction which is "pre-stressed" by being placed under compression prior to supporting any loads beyond its own dead weight.
New!!: Rebar and Prestressed concrete · See more »
Rebar spacer
A rebar spacer is a device that secures the reinforcing steel or "rebar" in reinforced concrete structures as the rebar is assembled in place prior to the final concrete pour.
New!!: Rebar and Rebar spacer · See more »
Recycling
Recycling is the process of converting waste materials into new materials and objects.
New!!: Rebar and Recycling · See more »
Reinforced concrete
Reinforced concrete (RC) (also called reinforced cement concrete or RCC) is a composite material in which concrete's relatively low tensile strength and ductility are counteracted by the inclusion of reinforcement having higher tensile strength or ductility.
New!!: Rebar and Reinforced concrete · See more »
Rust
Rust is an iron oxide, a usually red oxide formed by the redox reaction of iron and oxygen in the presence of water or air moisture.
New!!: Rebar and Rust · See more »
Shear strength
In engineering, shear strength is the strength of a material or component against the type of yield or structural failure where the material or component fails in shear.
New!!: Rebar and Shear strength · See more »
Spall
Spall is flakes of a material that are broken off a larger solid body and can be produced by a variety of mechanisms, including as a result of projectile impact, corrosion, weathering, cavitation, or excessive rolling pressure (as in a ball bearing).
New!!: Rebar and Spall · See more »
Specified Minimum Yield Strength
Specified Minimum Yield Strength (SMYS) means the specified minimum yield strength for steel pipe manufactured in accordance with a listed specification.
New!!: Rebar and Specified Minimum Yield Strength · See more »
Spot welding
Resistance spot welding (RSW) is a process in which contacting metal surface points are joined by the heat obtained from resistance to electric current.
New!!: Rebar and Spot welding · See more »
Stainless steel
In metallurgy, stainless steel, also known as inox steel or inox from French inoxydable (inoxidizable), is a steel alloy with a minimum of 10.5% chromium content by mass.
New!!: Rebar and Stainless steel · See more »
Steel
Steel is an alloy of iron and carbon and other elements.
New!!: Rebar and Steel · See more »
Steel fixer
A steel fixer (UK, ironworkers or "rod busters" in the United States) is a tradesman who positions and secures steel reinforcing bars, also known as rebar, and steel mesh used in reinforced concrete on construction projects.
New!!: Rebar and Steel fixer · See more »
Stress (mechanics)
In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighboring particles of a continuous material exert on each other, while strain is the measure of the deformation of the material.
New!!: Rebar and Stress (mechanics) · See more »
Structural integrity and failure
Structural integrity and failure is an aspect of engineering which deals with the ability of a structure to support a designed load (weight, force, etc...) without breaking, and includes the study of past structural failures in order to prevent failures in future designs.
New!!: Rebar and Structural integrity and failure · See more »
Structural load
Structural loads or actions are forces, deformations, or accelerations applied to a structure or its components.
New!!: Rebar and Structural load · See more »
Tempering (metallurgy)
Tempering is a process of heat treating, which is used to increase the toughness of iron-based alloys.
New!!: Rebar and Tempering (metallurgy) · See more »
Tension (physics)
In physics, tension may be described as the pulling force transmitted axially by the means of a string, cable, chain, or similar one-dimensional continuous object, or by each end of a rod, truss member, or similar three-dimensional object; tension might also be described as the action-reaction pair of forces acting at each end of said elements.
New!!: Rebar and Tension (physics) · See more »
Tented roof
A tented roof is a type of polygonal hipped roof with steeply pitched slopes rising to a peak.
New!!: Rebar and Tented roof · See more »
Thaddeus Hyatt
Thaddeus Hyatt (July 21, 1816 – July 25, 1901) was an American abolitionist and inventor.
New!!: Rebar and Thaddeus Hyatt · See more »
Thermal expansion
Thermal expansion is the tendency of matter to change in shape, area, and volume in response to a change in temperature.
New!!: Rebar and Thermal expansion · See more »
Thermomechanical processing
Thermomechanical processing, is a metallurgical process that combines mechanical or plastic deformation process like compression or forging, rolling etc.
New!!: Rebar and Thermomechanical processing · See more »
Ultimate tensile strength
Ultimate tensile strength (UTS), often shortened to tensile strength (TS), ultimate strength, or Ftu within equations, is the capacity of a material or structure to withstand loads tending to elongate, as opposed to compressive strength, which withstands loads tending to reduce size.
New!!: Rebar and Ultimate tensile strength · See more »
Yield (engineering)
The yield point is the point on a stress–strain curve that indicates the limit of elastic behavior and the beginning of plastic behavior.
New!!: Rebar and Yield (engineering) · See more »
1989 Loma Prieta earthquake
The 1989 Loma Prieta earthquake occurred in Northern California on October 17 at local time (1989-10-18 00:04 UTC).
New!!: Rebar and 1989 Loma Prieta earthquake · See more »
Redirects here:
Concrete reinforcing bar, Deformed bar, Primary rebar, Primary reinforcement, Re-bar, Re-rod, Rebars, Reinforcement bar, Reinforcement steel, Reinforcing bar, Reinforcing bars, Reinforcing steel, Reinforcing steel bar, Rerod, Secondary rebar, Secondary reinforcement, Steel reinforcement.
References
[1] https://en.wikipedia.org/wiki/Rebar
