Faster access than browser!
122 relations: Alternating current, Amorphous solid, Ampere, Arthur Claude Ruge, Ayrton-Perry winding, Biasing, Bifilar coil, Bill of materials, Calibration, Capacitance, Carbon microphone, Cermet, Chromel, Circuit design, Circuit diagram, Control grid, Decimal separator, Diesel locomotive, Dummy load, Dynamic braking, E-series of preferred numbers, Edward E. Simmons, Electric generator, Electrical impedance, Electrical network, Electrical resistance and conductance, Electrical resistivity and conductivity, Electromagnetic coil, Electromagnetic induction, Electronic circuit, Electronic color code, Electronic component, Electronics, Engineering tolerance, Flicker noise, Fluctuation-dissipation theorem, Four-terminal sensing, Galvanometer, Geometric progression, Georg Ohm, Heat sink, Helix, Humistor, Inductance, Infinitesimal strain theory, Inrush current, Instrumentation amplifier, Integrated circuit, International Electrotechnical Commission, International System of Units, ..., Iron–hydrogen resistor, Johnson–Nyquist noise, Kelvin, Laboratory, Laser trimming, Lead(II) oxide, Letter and digit code, Liquid rheostat, Low-noise amplifier, Manganin, Metal electrode leadless face, Micrometre, Multimeter, Nichrome, Noise (electronics), Ohm, Ohm's law, Ohmmeter, Omega, Operating temperature, Order of magnitude, Overvoltage, Passivity (engineering), Phenol formaldehyde resin, Phosphor bronze, Photoresist, Photoresistor, Piezoresistive effect, Portland cement, Potential, Potentiometer, Power (physics), Preamplifier, Preferred number, Primary standard, Printed circuit board, Pull-up resistor, Quantum Hall effect, Quantum tunnelling composite, RadioShack, Radix point, Ruthenium(IV) oxide, Schematic, Screen printing, Shot noise, Significant figures, Sintering, Sputtering, Strain gauge, Surface-mount technology, Tantalum, Tantalum nitride, Temperature coefficient, Terminal (electronics), Thermistor, Thermocouple, Thermoelectric effect, Through-hole technology, Transmission line, Trimmer (electronics), Ultraviolet, Vacuum deposition, Vacuum tube, Vitreous enamel, Volt, Voltage divider, Voltage regulator, Von Klitzing, Watt, Wheatstone bridge, Y-Δ transform, Zero-ohm link. Expand index (72 more) »
Alternating current
Alternating current (AC) is an electric current which periodically reverses direction, in contrast to direct current (DC) which flows only in one direction.
New!!: Resistor and Alternating current · See more »
Amorphous solid
In condensed matter physics and materials science, an amorphous (from the Greek a, without, morphé, shape, form) or non-crystalline solid is a solid that lacks the long-range order that is characteristic of a crystal.
New!!: Resistor and Amorphous solid · See more »
Ampere
The ampere (symbol: A), often shortened to "amp",SI supports only the use of symbols and deprecates the use of abbreviations for units.
New!!: Resistor and Ampere · See more »
Arthur Claude Ruge
Arthur Claude Ruge (pronounced ROO-gee) (July 28, 1905 – April 3, 2000) was an American mechanical engineer and inventor who developed and pioneered the modern bonded wire resistance strain gauge.
New!!: Resistor and Arthur Claude Ruge · See more »
Ayrton-Perry winding
Ayrton-Perry winding is a type of bifilar winding pattern used in winding wire on forms to make electronic components.
New!!: Resistor and Ayrton-Perry winding · See more »
Biasing
Biasing in electronics means establishing predetermined voltages or currents at various points of an electronic circuit for the purpose of establishing proper operating conditions in electronic components.
New!!: Resistor and Biasing · See more »
Bifilar coil
A bifilar coil is an electromagnetic coil that contains two closely spaced, parallel windings.
New!!: Resistor and Bifilar coil · See more »
Bill of materials
A bill of materials or product structure (sometimes bill of material, BOM or associated list) is a list of the raw materials, sub-assemblies, intermediate assemblies, sub-components, parts, and the quantities of each needed to manufacture an end product.
New!!: Resistor and Bill of materials · See more »
Calibration
Calibration in measurement technology and metrology is the comparison of measurement values delivered by a device under test with those of a calibration standard of known accuracy.
New!!: Resistor and Calibration · See more »
Capacitance
Capacitance is the ratio of the change in an electric charge in a system to the corresponding change in its electric potential.
New!!: Resistor and Capacitance · See more »
Carbon microphone
The carbon microphone, also known as carbon button microphone, button microphone, or carbon transmitter, is a type of microphone, a transducer that converts sound to an electrical audio signal.
New!!: Resistor and Carbon microphone · See more »
Cermet
A cermet is a composite material composed of ceramic (cer) and metal (met) materials.
New!!: Resistor and Cermet · See more »
Chromel
Chromel is an alloy made of approximately 90 percent nickel and 10 percent chromium that is used to make the positive conductors of ANSI Type E (chromel-constantan) and K (chromel-alumel) thermocouples.
New!!: Resistor and Chromel · See more »
Circuit design
The process of circuit design can cover systems ranging from complex electronic systems all the way down to the individual transistors within an integrated circuit.
New!!: Resistor and Circuit design · See more »
Circuit diagram
A circuit diagram (electrical diagram, elementary diagram, electronic schematic) is a graphical representation of an electrical circuit.
New!!: Resistor and Circuit diagram · See more »
Control grid
The control grid is an electrode used in amplifying thermionic valves (vacuum tubes) such as the triode, tetrode and pentode, used to control the flow of electrons from the cathode to the anode (plate) electrode.
New!!: Resistor and Control grid · See more »
Decimal separator
A decimal separator is a symbol used to separate the integer part from the fractional part of a number written in decimal form.
New!!: Resistor and Decimal separator · See more »
Diesel locomotive
A diesel locomotive is a type of railway locomotive in which the prime mover is a diesel engine.
New!!: Resistor and Diesel locomotive · See more »
Dummy load
A dummy load is a device used to simulate an electrical load, usually for testing purposes.
New!!: Resistor and Dummy load · See more »
Dynamic braking
Dynamic braking is the use of an electric traction motor as a generator when slowing a vehicle such as an electric or diesel-electric locomotive.
New!!: Resistor and Dynamic braking · See more »
E-series of preferred numbers
The E-series is a system of preferred numbers (also called preferred values) derived for use in electronic components.
New!!: Resistor and E-series of preferred numbers · See more »
Edward E. Simmons
Edward E. Simmons Jr. (1911 in Los Angeles, California – May 18, 2004, in Pasadena, California) was an electrical engineer and the inventor of the bonded wire resistance strain gauge.
New!!: Resistor and Edward E. Simmons · See more »
Electric generator
In electricity generation, a generator is a device that converts motive power (mechanical energy) into electrical power for use in an external circuit.
New!!: Resistor and Electric generator · See more »
Electrical impedance
Electrical impedance is the measure of the opposition that a circuit presents to a current when a voltage is applied.
New!!: Resistor and Electrical impedance · See more »
Electrical network
An electrical network is an interconnection of electrical components (e.g. batteries, resistors, inductors, capacitors, switches) or a model of such an interconnection, consisting of electrical elements (e.g. voltage sources, current sources, resistances, inductances, capacitances).
New!!: Resistor and Electrical network · See more »
Electrical resistance and conductance
The electrical resistance of an electrical conductor is a measure of the difficulty to pass an electric current through that conductor.
New!!: Resistor and Electrical resistance and conductance · See more »
Electrical resistivity and conductivity
Electrical resistivity (also known as resistivity, specific electrical resistance, or volume resistivity) is a fundamental property that quantifies how strongly a given material opposes the flow of electric current.
New!!: Resistor and Electrical resistivity and conductivity · See more »
Electromagnetic coil
An electromagnetic coil is an electrical conductor such as a wire in the shape of a coil, spiral or helix.
New!!: Resistor and Electromagnetic coil · See more »
Electromagnetic induction
Electromagnetic or magnetic induction is the production of an electromotive force (i.e., voltage) across an electrical conductor in a changing magnetic field.
New!!: Resistor and Electromagnetic induction · See more »
Electronic circuit
An electronic circuit is composed of individual electronic components, such as resistors, transistors, capacitors, inductors and diodes, connected by conductive wires or traces through which electric current can flow.
New!!: Resistor and Electronic circuit · See more »
Electronic color code
An electronic color code is used to indicate the values or ratings of electronic components, usually for resistors, but also for capacitors, inductors, diodes and others.
New!!: Resistor and Electronic color code · See more »
Electronic component
An electronic component is any basic discrete device or physical entity in an electronic system used to affect electrons or their associated fields.
New!!: Resistor and Electronic component · See more »
Electronics
Electronics is the discipline dealing with the development and application of devices and systems involving the flow of electrons in a vacuum, in gaseous media, and in semiconductors.
New!!: Resistor and Electronics · See more »
Engineering tolerance
Engineering tolerance is the permissible limit or limits of variation in.
New!!: Resistor and Engineering tolerance · See more »
Flicker noise
Flicker noise is a type of electronic noise with a 1/f power spectral density.
New!!: Resistor and Flicker noise · See more »
Fluctuation-dissipation theorem
The fluctuation–dissipation theorem (FDT) or fluctuation–dissipation relation (FDR) is a powerful tool in statistical physics for predicting the behavior of systems that obey detailed balance.
New!!: Resistor and Fluctuation-dissipation theorem · See more »
Four-terminal sensing
Four-terminal sensing (4T sensing), 4-wire sensing, or 4-point probes method is an electrical impedance measuring technique that uses separate pairs of current-carrying and voltage-sensing electrodes to make more accurate measurements than the simpler and more usual two-terminal (2T) sensing.
New!!: Resistor and Four-terminal sensing · See more »
Galvanometer
A galvanometer is an electromechanical instrument used for detecting and indicating electric current.
New!!: Resistor and Galvanometer · See more »
Geometric progression
In mathematics, a geometric progression, also known as a geometric sequence, is a sequence of numbers where each term after the first is found by multiplying the previous one by a fixed, non-zero number called the common ratio.
New!!: Resistor and Geometric progression · See more »
Georg Ohm
Georg Simon Ohm (16 March 1789 – 6 July 1854) was a German physicist and mathematician.
New!!: Resistor and Georg Ohm · See more »
Heat sink
A heat sink (also commonly spelled heatsink) is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant, where it is dissipated away from the device, thereby allowing regulation of the device's temperature at optimal levels.
New!!: Resistor and Heat sink · See more »
Helix
A helix, plural helixes or helices, is a type of smooth space curve, i.e. a curve in three-dimensional space.
New!!: Resistor and Helix · See more »
Humistor
A humistor is a type of variable resistor whose resistance varies based on humidity.
New!!: Resistor and Humistor · See more »
Inductance
In electromagnetism and electronics, inductance is the property of an electrical conductor by which a change in electric current through it induces an electromotive force (voltage) in the conductor.
New!!: Resistor and Inductance · See more »
Infinitesimal strain theory
In continuum mechanics, the infinitesimal strain theory is a mathematical approach to the description of the deformation of a solid body in which the displacements of the material particles are assumed to be much smaller (indeed, infinitesimally smaller) than any relevant dimension of the body; so that its geometry and the constitutive properties of the material (such as density and stiffness) at each point of space can be assumed to be unchanged by the deformation.
New!!: Resistor and Infinitesimal strain theory · See more »
Inrush current
Inrush current, input surge current, or switch-on surge is the maximal instantaneous input current drawn by an electrical device when first turned on.
New!!: Resistor and Inrush current · See more »
Instrumentation amplifier
An instrumentation (or instrumentational) amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching and thus make the amplifier particularly suitable for use in measurement and test equipment.
New!!: Resistor and Instrumentation amplifier · See more »
Integrated circuit
An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small flat piece (or "chip") of semiconductor material, normally silicon.
New!!: Resistor and Integrated circuit · See more »
International Electrotechnical Commission
The International Electrotechnical Commission (IEC; in French: Commission électrotechnique internationale) is an international standards organization that prepares and publishes International Standards for all electrical, electronic and related technologies – collectively known as "electrotechnology".
New!!: Resistor and International Electrotechnical Commission · See more »
International System of Units
The International System of Units (SI, abbreviated from the French Système international (d'unités)) is the modern form of the metric system, and is the most widely used system of measurement.
New!!: Resistor and International System of Units · See more »
Iron–hydrogen resistor
An iron–hydrogen resistor consists of a hydrogen-filled glass bulb (similar to a light bulb), in which an iron wire is located.
New!!: Resistor and Iron–hydrogen resistor · See more »
Johnson–Nyquist noise
Johnson–Nyquist noise (thermal noise, Johnson noise, or Nyquist noise) is the electronic noise generated by the thermal agitation of the charge carriers (usually the electrons) inside an electrical conductor at equilibrium, which happens regardless of any applied voltage.
New!!: Resistor and Johnson–Nyquist noise · See more »
Kelvin
The Kelvin scale is an absolute thermodynamic temperature scale using as its null point absolute zero, the temperature at which all thermal motion ceases in the classical description of thermodynamics.
New!!: Resistor and Kelvin · See more »
Laboratory
A laboratory (informally, lab) is a facility that provides controlled conditions in which scientific or technological research, experiments, and measurement may be performed.
New!!: Resistor and Laboratory · See more »
Laser trimming
Laser trimming is the manufacturing process of using a laser to adjust the operating parameters of an electronic circuit.
New!!: Resistor and Laser trimming · See more »
Lead(II) oxide
Lead(II) oxide, also called lead monoxide, is the inorganic compound with the molecular formula PbO.
New!!: Resistor and Lead(II) oxide · See more »
Letter and digit code
The letter and digit code for resistance and capacitance values and tolerances, which is also known as RKM code or "R notation", is a notation to specify resistor and capacitor values defined in the international standard IEC 60062 (formerly IEC 62) since 1952.
New!!: Resistor and Letter and digit code · See more »
Liquid rheostat
A liquid rheostat or water rheostat or salt water rheostat is a type of variable resistor.
New!!: Resistor and Liquid rheostat · See more »
Low-noise amplifier
A low-noise amplifier (LNA) is an electronic amplifier that amplifies a very low-power signal without significantly degrading its signal-to-noise ratio.
New!!: Resistor and Low-noise amplifier · See more »
Manganin
| specific_heat.
New!!: Resistor and Manganin · See more »
Metal electrode leadless face
Metal electrode leadless face (MELF) is a type of leadless cylindrical electronic surface mount device that is metallized at its ends.
New!!: Resistor and Metal electrode leadless face · See more »
Micrometre
The micrometre (International spelling as used by the International Bureau of Weights and Measures; SI symbol: μm) or micrometer (American spelling), also commonly known as a micron, is an SI derived unit of length equaling (SI standard prefix "micro-".
New!!: Resistor and Micrometre · See more »
Multimeter
A multimeter or a multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit.
New!!: Resistor and Multimeter · See more »
Nichrome
Nichrome (NiCr, nickel-chrome, chrome-nickel, etc.) is any of various alloys of nickel, chromium, and often iron (and possibly other elements).
New!!: Resistor and Nichrome · See more »
Noise (electronics)
In electronics, noise is an unwanted disturbance in an electrical signal.
New!!: Resistor and Noise (electronics) · See more »
Ohm
The ohm (symbol: Ω) is the SI derived unit of electrical resistance, named after German physicist Georg Simon Ohm.
New!!: Resistor and Ohm · See more »
Ohm's law
Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points.
New!!: Resistor and Ohm's law · See more »
Ohmmeter
An ohmmeter is an electrical instrument that measures electrical resistance, the opposition to an electric current.
New!!: Resistor and Ohmmeter · See more »
Omega
Omega (capital: Ω, lowercase: ω; Greek ὦ, later ὦ μέγα, Modern Greek ωμέγα) is the 24th and last letter of the Greek alphabet.
New!!: Resistor and Omega · See more »
Operating temperature
An operating temperature is the temperature at which an electrical or mechanical device operates.
New!!: Resistor and Operating temperature · See more »
Order of magnitude
An order of magnitude is an approximate measure of the number of digits that a number has in the commonly-used base-ten number system.
New!!: Resistor and Order of magnitude · See more »
Overvoltage
When the voltage in a circuit or part of it is raised above its upper design limit, this is known as overvoltage.
New!!: Resistor and Overvoltage · See more »
Passivity (engineering)
Passivity is a property of engineering systems, used in a variety of engineering disciplines, but most commonly found in analog electronics and control systems.
New!!: Resistor and Passivity (engineering) · See more »
Phenol formaldehyde resin
Phenol formaldehyde resins (PF) or phenolic resins are synthetic polymers obtained by the reaction of phenol or substituted phenol with formaldehyde.
New!!: Resistor and Phenol formaldehyde resin · See more »
Phosphor bronze
Phosphor bronze is an alloy of copper with 0.5–11% of tin and 0.01–0.35% phosphorus.
New!!: Resistor and Phosphor bronze · See more »
Photoresist
A photoresist is a light-sensitive material used in several processes, such as photolithography and photoengraving, to form a patterned coating on a surface.
New!!: Resistor and Photoresist · See more »
Photoresistor
A photoresistor (or light-dependent resistor, LDR, or photo-conductive cell) is a light-controlled variable resistor.
New!!: Resistor and Photoresistor · See more »
Piezoresistive effect
The piezoresistive effect is a change in the electrical resistivity of a semiconductor or metal when mechanical strain is applied.
New!!: Resistor and Piezoresistive effect · See more »
Portland cement
Portland cement is the most common type of cement in general use around the world as a basic ingredient of concrete, mortar, stucco, and non-specialty grout.
New!!: Resistor and Portland cement · See more »
Potential
Potential generally refers to a currently unrealized ability.
New!!: Resistor and Potential · See more »
Potentiometer
A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.
New!!: Resistor and Potentiometer · See more »
Power (physics)
In physics, power is the rate of doing work, the amount of energy transferred per unit time.
New!!: Resistor and Power (physics) · See more »
Preamplifier
A preamplifier (preamp or "pre") is an electronic amplifier that converts a weak electrical signal into an output signal strong enough to be noise-tolerant and strong enough for further processing, or for sending to a power amplifier and a loudspeaker.
New!!: Resistor and Preamplifier · See more »
Preferred number
In industrial design, preferred numbers (also called preferred values or preferred series) are standard guidelines for choosing exact product dimensions within a given set of constraints.
New!!: Resistor and Preferred number · See more »
Primary standard
A primary standard in metrology is a standard that is sufficiently accurate such that it is not calibrated by or subordinate to other standards.
New!!: Resistor and Primary standard · See more »
Printed circuit board
A printed circuit board (PCB) mechanically supports and electrically connects electronic components or electrical components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate.
New!!: Resistor and Printed circuit board · See more »
Pull-up resistor
In electronic logic circuits, a pull-up resistor is a resistor used to ensure a known state for a signal.
New!!: Resistor and Pull-up resistor · See more »
Quantum Hall effect
The quantum Hall effect (or integer quantum Hall effect) is a quantum-mechanical version of the Hall effect, observed in two-dimensional electron systems subjected to low temperatures and strong magnetic fields, in which the Hall conductance undergoes quantum Hall transitions to take on the quantized values where is the channel current, is the Hall voltage, is the elementary charge and is Planck's constant.
New!!: Resistor and Quantum Hall effect · See more »
Quantum tunnelling composite
Quantum tunnelling composites (or QTCs) are composite materials of metals and non-conducting elastomeric binder, used as pressure sensors.
New!!: Resistor and Quantum tunnelling composite · See more »
RadioShack
RadioShack, formally RadioShack Corporation, is the trade name of an American retailer founded in 1921, which operates a chain of electronics stores.
New!!: Resistor and RadioShack · See more »
Radix point
In mathematics and computing, a radix point (or radix character) is the symbol used in numerical representations to separate the integer part of a number (to the left of the radix point) from its fractional part (to the right of the radix point).
New!!: Resistor and Radix point · See more »
Ruthenium(IV) oxide
Ruthenium(IV) oxide is the inorganic compound with the formula RuO2.
New!!: Resistor and Ruthenium(IV) oxide · See more »
Schematic
A schematic, or schematic diagram, is a representation of the elements of a system using abstract, graphic symbols rather than realistic pictures.
New!!: Resistor and Schematic · See more »
Screen printing
Screen printing is a printing technique whereby a mesh is used to transfer ink onto a substrate, except in areas made impermeable to the ink by a blocking stencil.
New!!: Resistor and Screen printing · See more »
Shot noise
Shot noise or Poisson noise is a type of electronic noise which can be modeled by a Poisson process.
New!!: Resistor and Shot noise · See more »
Significant figures
The significant figures (also known as the significant digits) of a number are digits that carry meaning contributing to its measurement resolution.
New!!: Resistor and Significant figures · See more »
Sintering
Clinker nodules produced by sintering Sintering is the process of compacting and forming a solid mass of material by heat or pressure without melting it to the point of liquefaction.
New!!: Resistor and Sintering · See more »
Sputtering
Sputtering is a process whereby particles are ejected from a solid target material due to bombardment of the target by energetic particles, particularly gas ions in a laboratory.
New!!: Resistor and Sputtering · See more »
Strain gauge
A strain gauge is a device used to measure strain on an object.
New!!: Resistor and Strain gauge · See more »
Surface-mount technology
Surface-mount technology (SMT) is a method for producing electronic circuits in which the components are mounted or placed directly onto the surface of printed circuit boards (PCBs).
New!!: Resistor and Surface-mount technology · See more »
Tantalum
Tantalum is a chemical element with symbol Ta and atomic number 73.
New!!: Resistor and Tantalum · See more »
Tantalum nitride
Tantalum nitride (TaN) is an inorganic chemical compound.
New!!: Resistor and Tantalum nitride · See more »
Temperature coefficient
A temperature coefficient describes the relative change of a physical property that is associated with a given change in temperature.
New!!: Resistor and Temperature coefficient · See more »
Terminal (electronics)
A terminal is the point at which a conductor from an electrical component, device or network comes to an end and provides a point of connection to external circuits.
New!!: Resistor and Terminal (electronics) · See more »
Thermistor
A thermistor is a type of resistor whose resistance is dependent on temperature, more so than in standard resistors.
New!!: Resistor and Thermistor · See more »
Thermocouple
A thermocouple is an electrical device consisting of two dissimilar electrical conductors forming electrical junctions at differing temperatures.
New!!: Resistor and Thermocouple · See more »
Thermoelectric effect
The thermoelectric effect is the direct conversion of temperature differences to electric voltage and vice versa via a thermocouple.
New!!: Resistor and Thermoelectric effect · See more »
Through-hole technology
Through-hole technology (tht), also spelled "thru-hole", refers to the mounting scheme used for electronic components that involves the use of leads on the components that are inserted into holes drilled in printed circuit boards (PCB) and soldered to pads on the opposite side either by manual assembly (hand placement) or by the use of automated insertion mount machines.
New!!: Resistor and Through-hole technology · See more »
Transmission line
In communications and electronic engineering, a transmission line is a specialized cable or other structure designed to conduct alternating current of radio frequency, that is, currents with a frequency high enough that their wave nature must be taken into account.
New!!: Resistor and Transmission line · See more »
Trimmer (electronics)
A trimmer is a miniature adjustable electrical component.
New!!: Resistor and Trimmer (electronics) · See more »
Ultraviolet
Ultraviolet (UV) is electromagnetic radiation with a wavelength from 10 nm to 400 nm, shorter than that of visible light but longer than X-rays.
New!!: Resistor and Ultraviolet · See more »
Vacuum deposition
Vacuum deposition is a family of processes used to deposit layers of material atom-by-atom or molecule-by-molecule on a solid surface.
New!!: Resistor and Vacuum deposition · See more »
Vacuum tube
In electronics, a vacuum tube, an electron tube, or just a tube (North America), or valve (Britain and some other regions) is a device that controls electric current between electrodes in an evacuated container.
New!!: Resistor and Vacuum tube · See more »
Vitreous enamel
Vitreous enamel, also called porcelain enamel, is a material made by fusing powdered glass to a substrate by firing, usually between.
New!!: Resistor and Vitreous enamel · See more »
Volt
The volt (symbol: V) is the derived unit for electric potential, electric potential difference (voltage), and electromotive force.
New!!: Resistor and Volt · See more »
Voltage divider
In electronics, a voltage divider (also known as a potential divider) is a passive linear circuit that produces an output voltage (Vout) that is a fraction of its input voltage (Vin).
New!!: Resistor and Voltage divider · See more »
Voltage regulator
A voltage regulator is an electronic circuit that provides a stable DC voltage independent of the load current, temperature and AC line voltage variations.
New!!: Resistor and Voltage regulator · See more »
Von Klitzing
Von Klitzing is a surname.
New!!: Resistor and Von Klitzing · See more »
Watt
The watt (symbol: W) is a unit of power.
New!!: Resistor and Watt · See more »
Wheatstone bridge
A Wheatstone bridge is an electrical circuit used to measure an unknown electrical resistance by balancing two legs of a bridge circuit, one leg of which includes the unknown component.
New!!: Resistor and Wheatstone bridge · See more »
Y-Δ transform
The Y-Δ transform, also written wye-delta and also known by many other names, is a mathematical technique to simplify the analysis of an electrical network.
New!!: Resistor and Y-Δ transform · See more »
Zero-ohm link
A zero-ohm link or zero-ohm resistor is a wire link used to connect traces on a printed circuit board that is packaged in the same physical package format as a resistor.
New!!: Resistor and Zero-ohm link · See more »
Redirects here:
Carbon film resistor, Carbon transducer, Carbon-pile pressure transducer, Current sensing resistor, Electrical resistor, Film resistors, Foil resistors, Grid resistor, High resistance, Ideal resistor, Metal Film, Metal film, Non-ideal resistor, Parallel resistors, Power resistor, Radial-lead resistor, Real resistor, Resistive dissipation, Resistor topology, Resistors, Resistors in parallel, Resistors in series, The Resistor, Wire resistor, Wire wound resistors, Wire-wound resistor.
References
[1] https://en.wikipedia.org/wiki/Resistor
